编译出错,求助解决方法

sclau · 发表于 2011-11-29 12:03:25

#Region ;**** 参数创建于 ACNWrapper_GUI ****
#AutoIt3Wrapper_icon=1.ico
#AutoIt3Wrapper_outfile=科宏U盘启动盘制作工具.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=QQ:215272447
#AutoIt3Wrapper_Res_Description=Kehong USB System 2011
#AutoIt3Wrapper_Res_Fileversion=8.0.0.2011
[email=#AutoIt3Wrapper_Res_LegalCopyright=@copyright]#AutoIt3Wrapper_Res_LegalCopyright=@copyright[/email] 2011
#AutoIt3Wrapper_Res_Field=CompanyName|科宏电脑科技
#AutoIt3Wrapper_Res_Field=程序设计|飞天怪龙
#EndRegion ;**** 参数创建于 ACNWrapper_GUI ****
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GUIListView.au3>
#include <ListViewConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <ProgressConstants.au3>
#include <GuiImageList.au3>
#include <Process.au3>
#Region ### START Koda GUI section ### Form=
Dim $Dll
Dim $usb1
Global [email=$DwptW=@TempDir&]$DwptW=@TempDir&'\DsptW.eXe'[/email]
Global [email=$ShowDrive=@TempDir&]$ShowDrive=@TempDir&'\ShowDrive.eXe'[/email]
Global [email=$Part=@TempDir&]$Part=@TempDir&'\Part.Txt'[/email]
Global [email=$GhostIni=@TempDir&]$GhostIni=@TempDir&'\Ghost.InI'[/email]
If FileExists($GhostIni) Then FileDelete($GhostIni)
FileInstall('ShowDrive.Vxd',$ShowDrive,1)
RunWait($ShowDrive&' /S','',@Sw_Hide)
FileDelete($ShowDrive)
FileInstall('DsptW.Vxd',$DwptW,1)
If FileExists($Part) Then FileDelete($Part)
RunWait(@ComSpec&' /C '&$DwptW&' 0 /L >'&$Part,'',@Sw_Hide)
$SerailNumber=StringMid(FileReadLine($Part,3),59)
FileDelete($Part)
For $i=1 To 26
      RunWait(@ComSpec&' /C '&$DwptW&' '&$i&' /Find:All /GhostStyle >>'&$Part,'',@Sw_Hide)
      If StringInStr(FileRead($Part),'Error') Then ExitLoop
Next
      FileDelete($DwptW)
Dim $v
      _FileReadToArray($Part,$v)
      FileWrite($GhostIni,'[HardDisk]'&@CRLF)
For $i=1 To $v[0]
            $ReadLine=FileReadLine($Part,$i)
      If StringInStr($ReadLine,'Error') Then ExitLoop
      If Not StringInStr($ReadLine,'No.') And StringInStr($ReadLine,':') Then
            $GhostStr=StringMid($ReadLine,6,2)&'='&StringMid($ReadLine,1,3)
            If StringMid($GhostStr,1,1)=1 And StringMid($ReadLine,6,2)='  ' Then
                     FileWriteLine($GhostIni,StringReplace($GhostStr&'C:','  ',''))
            Else
                     FileWriteLine($GhostIni,$GhostStr)
            EndIf
            ExitLoop
      EndIf
Next
For $i=1 To $v[0]
            $ReadLine=FileReadLine($Part,$i)
      If StringInStr($ReadLine,'Error') Then ExitLoop
      If Not StringInStr($ReadLine,'No.') And StringInStr($ReadLine,':') Then
            $GhostStr=StringMid($ReadLine,6,2)&'='&StringMid($ReadLine,1,3)
            If StringMid($ReadLine,6,2)<>'' And Not StringInStr($GhostStr,'1:1') Then FileWriteLine($GhostIni,$GhostStr)
      EndIf
Next
      FileDelete($Part)
      _FileReadToArray($GhostIni,$v)
For $i=2 To $v[0]
      $ReadLine=StringLeft(FileReadLine($GhostIni,$i),3)
      If StringLeft($ReadLine,1)=1 Then
            ExitLoop
      EndIf
Next
$Var=IniReadSection($GhostIni,'HardDisk')
If @Error Then
MsgBox(262144, '', '出错了啦! 当前目录找不到 Ghost.InI 文件.')
Else
For $i = 1 To $Var[0][0]
            $GetLastP=StringMid($Var[$i][0],1,1)
            If StringInStr($GetLastP,'H') Then $GetLastP=StringMid($Var[$i+1][0],1,1)
            If $GetLastP<>1 Then
                     ExitLoop
            EndIf
      Next
      EndIf
$i = 1
$Str = "CDEFGHIJKLMNOPQRSTUVWXYZ"
While $i <= 24
$Str1 = StringLeft($Str, $i)
$Dirve = StringRight($Str1, 1)
$var = DriveGetType($Dirve & ":\")
If FileExists($Dirve & ":\") Then
If $var = "REMOVABLE" Then
$Dirve1 = $Dirve & ":"
EndIf
If $var <> "REMOVABLE" Then
         $Dirve1=""
EndIf
EndIf
$i = $i + 1
WEnd
ini()
$usbhdd=IniRead($GhostIni,"USB","name","请插入U盘")
If $Dirve1<>"" Then
$usbhdd1=$Dirve1&"名称:"&$usbhdd
EndIf
If $Dirve1="" Then
      $usbhdd1="请插入U盘再运行本程序！"
      MsgBox(64,"","你没有插入U盘请插入U盘再运行本程序！")
      Exit
EndIf
FileInstall("SkinCrafterDll.dll", @TempDir & "\SkinCrafterDll.dll", 1)
FileInstall("vista.skf", @TempDir & "\vista.skf", 1)
$Form1 = GUICreate("欢迎您使用科宏U盘启动盘制作工具", 395, 405, -1, -1)
_SkinGUI(@TempDir & "\SkinCrafterDll.dll", @TempDir & "\vista.skf", $Form1)
FileInstall("usb-PE.bmp",@TempDir&"\usb-PE.bmp",1)
$Pic1 = GUICtrlCreatePic(@TempDir&"\usb-PE.bmp", 0, 0, 395, 90)
$Label1 = GUICtrlCreateLabel("选择要制作的U盘", 24, 138, 90, 20)
$Combo1 = GUICtrlCreateCombo($usbhdd1, 125, 136, 240, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
$Labelzip = GUICtrlCreateLabel("选择U盘启动格式", 24 , 108, 90, 20)
$Combo2 = GUICtrlCreateCombo("", 125, 106, 240, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
GUICtrlSetData($Combo2, "USB-HDD|USB-ZIP", "USB-HDD")
$ListView1 = GUICtrlCreateListView("分区|序号|文件系统|已用容量|剩余容量|总容量(GB)", 24, 160, 345, 100)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 35)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 35)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 3, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 4, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 5,80)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 0, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 1, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 2, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 3, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 4, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 5, 2)
$z = 0
      _GUICtrlListView_DeleteAllItems($ListView1)
      $read = IniReadSection($GhostIni,"HardDisk")
            If @error Then
                     MsgBox(64,"","错误")
                     EndIf
      If Not @error Then

            For $i = 1 To $read[0][0]
                                             $fjxt=DriveGetFileSystem($read[$i][0])
                                             $zrl=Round(DriveSpaceTotal($read[$i][0])/1024,2)
                                             $syrl=Round(DriveSpaceFree($read[$i][0])/1024,2)
                                             $usrl=Round($zrl-$syrl,2)
      GUICtrlCreateListViewItem($read[$i][0], $ListView1)
                     _GUICtrlListView_AddSubItem($ListView1, $z, $read[$i][1], 1, $z+1)
                                             _GUICtrlListView_AddSubItem($ListView1, $z, $fjxt, 2, $z+1)
                                                _GUICtrlListView_AddSubItem($ListView1, $z, $syrl, 4, $z+1)
                                                _GUICtrlListView_AddSubItem($ListView1, $z, $zrl, 5, $z+1)
                                                _GUICtrlListView_AddSubItem($ListView1, $z, $usrl, 3, $z+1)
                     $z += 1
            Next
                     EndIf
                     _GUICtrlListView_SetItemSelected($ListView1, $read[0][0]-1)
                     GUICtrlCreateGroup("科宏提醒您",24,260,350,55)
                     GUICtrlCreateLabel("本程序制作成的U盘启动盘具有三防特性：防毒﹑防删﹑防格",32,280,340,15)
                     GUICtrlCreateLabel("运行本程序，请关闭安全软件，谢谢您的合作，祝您成功！",34,295,335,15)
$Button3 = GUICtrlCreateButton("开始制作(&S)", 30, 363, 90, 30)
$Button5 = GUICtrlCreateButton("还原U盘(&U)", 157, 363, 90, 30)
$ZT=GUICtrlCreateLabel("当前状态：等待用户确认设置开始制作...",24,330,380,20)
$pro=GUICtrlCreateProgress(24,345,350,8,$PBS_SMOOTH)
If $Dirve1="" Then
      GUICtrlSetState($Button3,$GUI_DISABLE)
      EndIf
$Button4 = GUICtrlCreateButton("退出", 280, 363, 90, 30)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
While 1
      $nMsg = GUIGetMsg()
      Switch $nMsg

            Case $Button4
                     quit()
            Case $GUI_EVENT_CLOSE
                     quit()
            Case $Button3
                     GUICtrlSetState($Button3,$GUI_DISABLE)
                     GUICtrlSetState($Button4,$GUI_DISABLE)
                     GUICtrlSetState($Button5,$GUI_DISABLE)
                     $ZIP=GUICtrlRead($Combo2)
                     If $ZIP="USB-HDD" Then
                              $usb1=""
                     EndIf
                              If $ZIP="USB-ZIP" Then
                              $usb1=" --ZIP"
                     EndIf
                     $ZZUSB=GUICtrlRead($Combo1)
                     $ZZUSBHDD=StringLeft($ZZUSB,2)
                     $HDFB=IniRead($GhostIni,"HardDisk",$ZZUSBHDD,"2:1")
                     $HDFB2=StringLeft($HDFB,1)
                     $HDFB1=$HDFB2-1
                     GUICtrlSetData($pro,10)
                     $ask=MsgBox(64+4,"提示","你选择的了将"&$ZZUSB&"制作成可启动U盘"[email=&@CRLF]&@CRLF[/email]&"要确定开始制作，请点击“是”，否则点击“否”")
                     If $ask=6 Then
                              GUICtrlSetData($ZT,"当前状态：正在准备程序必须数据中，请稍候...")
                              FileInstall("fbinst.exe",@WindowsDir&"\fbinst.exe",1)
                              ;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"format --raw", @ScriptDir, @SW_HIDE)
                              RunWait(@WindowsDir&"\fbinst (hd"&$HDFB1&")"&" format --raw --force",@WindowsDir,@SW_HIDE)
                              GUICtrlSetData($pro,20)
                              ;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"format --extended 125m  --force --fat32 --align --primary 8m",@ScriptDir, @SW_HIDE)
                              RunWait(@WindowsDir&"\fbinst (hd"&$HDFB1&")"&" format --extended 90m  --force"&$usb1&" --fat32 --align --primary 8m",@WindowsDir,@SW_HIDE)
                              GUICtrlSetData($ZT,"当前状态：正在将引导程序写入U盘中，请稍候...")
                              GUICtrlSetData($pro,40)
                              Sleep(1000)
                              GUICtrlSetData($ZT,"当前状态：正在准备U盘PE数据和必备文件中，请稍候...")
                              FileInstall("amwin.fba",@WindowsDir&"\abc.fba",1)
                              GUICtrlSetData($pro,60)
                              GUICtrlSetData($ZT,"当前状态：正在将PE维护系统数据写入U盘中，请稍候...")
                              ;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"load "[email=&@WindowsDir&]&@WindowsDir&"\abc.fba",@ScriptDir[/email], @SW_HIDE)
                              RunWait(@WindowsDir&"\fbinst (hd"&$HDFB1&")"&" load "[email=&@WindowsDir&]&@WindowsDir&"\abc.fba",@WindowsDir,@SW_HIDE[/email])
                              GUICtrlSetData($pro,90)
                              FileDelete(@WindowsDir&"\fbinst.exe")
                              FileDelete(@WindowsDir&"\abc.fba")
                              Sleep(1000)
            GUICtrlSetData($pro,100)
                              GUICtrlSetData($ZT,"当前状态：所有任务全部完成！")
                              MsgBox(64,"恭喜","科宏U盘启动盘制作成功")
                              quit()
                     EndIf






                     If $ask=7 Then
                                                      GUICtrlSetState($Button3,$GUI_ENABLE)
                     GUICtrlSetState($Button4,$GUI_ENABLE)
                     GUICtrlSetState($Button5,$GUI_ENABLE)
                     GUICtrlSetData($pro,0)
            EndIf
      Case $Button5
                                    $ZZUSB=GUICtrlRead($Combo1)
                     $ZZUSBHDD=StringLeft($ZZUSB,2)
                     $HDFB=IniRead($GhostIni,"HardDisk",$ZZUSBHDD,"2:1")
                     $HDFB2=StringLeft($HDFB,1)
                     $HDFB1=$HDFB2-1
                     GUICtrlSetState($Button3,$GUI_DISABLE)
                     GUICtrlSetState($Button4,$GUI_DISABLE)
                     GUICtrlSetState($Button5,$GUI_DISABLE)
            $ask1=MsgBox(64+4,"提示","你选择的了将"&$ZZUSB&"U盘重置到默认状态，"[email=&@CRLF]&@CRLF[/email]&"要确定重置U盘，请点击“是”，否则点击“否”")
            If $ask1=6 Then
                     GUICtrlSetData($ZT,"当前状态：正在重置U盘中，请稍候...")
                     FileInstall("fbinst.exe",@WindowsDir&"\fbinst.exe",1)
                     RunWait(@WindowsDir&"\fbinst (hd"&$HDFB1&")"&" format --raw --force",@WindowsDir,@SW_HIDE)
                     GUICtrlSetData($pro,100)
                     Sleep(1000)
                     MsgBox(64,"提示","重置U盘状态成功！")
                     GUICtrlSetData($ZT,"当前状态：等待用户确认设置开始制作...")
                     GUICtrlSetData($pro,0)
                                                                              GUICtrlSetState($Button3,$GUI_ENABLE)
                     GUICtrlSetState($Button4,$GUI_ENABLE)
                     GUICtrlSetState($Button5,$GUI_ENABLE)
            EndIf
                                    If $ask1=7 Then
                                                      GUICtrlSetState($Button3,$GUI_ENABLE)
                     GUICtrlSetState($Button4,$GUI_ENABLE)
                     GUICtrlSetState($Button5,$GUI_ENABLE)
                     GUICtrlSetData($pro,0)
            EndIf
      EndSwitch
WEnd
Func ini()
      $strComputer = "."
      $objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\cimv2")
      $colItems = $objWMIService.ExecQuery("Select * from Win32_diskdrive")
      For $objItem In $colItems
            IniWrite($GhostIni, $objItem.interfacetype, "Name", $objItem.caption)
            $num = StringSplit($objItem.PNPDeviceID, "\")
            $ii = UBound($num)
            $ii = $ii - 1
            $number = String($num[$ii])
            IniWrite($GhostIni, $objItem.interfacetype, "ID", $number)
      Next
EndFunc ;==>ini
Func _SkinGUI($SkincrafterDll, $SkincrafterSkin, $Handle)
      $Dll = DllOpen($SkincrafterDll)
      DllCall($Dll, "int:cdecl", "InitLicenKeys", "wstr", "1", "wstr", "", "wstr", "1@1.com", "wstr", "1")
      DllCall($Dll, "int:cdecl", "InitDecoration", "int", 1)
      DllCall($Dll, "int:cdecl", "LoadSkinFromFile", "wstr", $SkincrafterSkin)
      DllCall($Dll, "int:cdecl", "DecorateAs", "int", $Handle, "int", 25)
      DllCall($Dll, "int:cdecl", "ApplySkin")
EndFunc ;==>_SkinGUI
Func quit()
      GUISetState(@SW_HIDE)
      DllCall($Dll, "int:cdecl", "DeInitDecoration")
      DllCall($Dll, "int:cdecl", "RemoveSkin")
      DllClose($Dll)
      FileDelete(@TempDir & "\SkinCrafterDll.dll")
      FileDelete(@TempDir & "\vista.skf")
      FileDelete($GhostIni)
      FileDelete($DwptW)
      FileDelete($ShowDrive)
      FileDelete(@TempDir&"\usb-PE.bmp")
      Exit
EndFunc

编译脚本就提示出错

运行脚本就提示出错

请问是怎么回事啊?

[ 本帖最后由 sclau 于 2011-11-29 12:05 编辑 ]

cfeng · 发表于 2011-11-29 17:09:20

找我吧162108338

都市浪子666 · 发表于 2011-11-29 20:58:08

#Region AutoIt3Wrapper 预编译参数(常用参数)
#AutoIt3Wrapper_Icon= ;图标,支持EXE,DLL,ICO
#AutoIt3Wrapper_OutFile= ;输出文件名
#AutoIt3Wrapper_OutFile_Type=exe ;文件类型
#AutoIt3Wrapper_Compression=4 ;压缩等级
#AutoIt3Wrapper_UseUPX=y ;使用压缩
#AutoIt3Wrapper_Res_Comment= ;注释
#AutoIt3Wrapper_Res_Description= ;详细信息
#AutoIt3Wrapper_Res_FileVersion= ;文件版本
#AutoIt3Wrapper_Res_FileVersion_AutoIncrement=p ;自动更新版本
#AutoIt3Wrapper_Res_LegalCopyright= ;版权
#AutoIt3Wrapper_Change2CUI=N                ;修改输出的程序为CUI(控制台程序)
;#AutoIt3Wrapper_Res_Field=AutoIt Version|%AutoItVer% ;自定义资源段
;#AutoIt3Wrapper_Run_Tidy=                ;脚本整理
;#AutoIt3Wrapper_Run_Obfuscator=       ;代码迷惑
;#AutoIt3Wrapper_Run_AU3Check= ;语法检查
;#AutoIt3Wrapper_Run_Before= ;运行前
;#AutoIt3Wrapper_Run_After= ;运行后
#EndRegion AutoIt3Wrapper 预编译参数(常用参数)
#cs ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

Au3 版本:
脚本作者:
Email:
QQ/TM:
脚本版本:
脚本功能:

#ce ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿脚本开始＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

#Region ;**** 参数创建于 ACNWrapper_GUI ****
#AutoIt3Wrapper_Icon=1.ico
#AutoIt3Wrapper_OutFile=科宏U盘启动盘制作工具.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=QQ:215272447
#AutoIt3Wrapper_Res_Description=Kehong USB System 2011
#AutoIt3Wrapper_Res_FileVersion=8.0.0.2011
#AutoIt3Wrapper_Res_LegalCopyright=@copyright]#AutoIt3Wrapper_Res_LegalCopyright=@copyright 2011
#AutoIt3Wrapper_Res_Field=CompanyName|科宏电脑科技
#AutoIt3Wrapper_Res_Field=程序设计|飞天怪龙
#EndRegion ;**** 参数创建于 ACNWrapper_GUI ****
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GUIListView.au3>
#include <ListViewConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <ProgressConstants.au3>
#include <GuiImageList.au3>
#include <Process.au3>
#Region ### START Koda GUI section ### Form=
Dim $Dll
Dim $usb1
Global $DwptW = @TempDir & '\DsptW.eXe'
Global  $ShowDrive = @TempDir & '\ShowDrive.eXe'
Global $Part = @TempDir & '\Part.Txt'
Global $GhostIni = @TempDir & '\Ghost.InI'
If FileExists($GhostIni) Then FileDelete($GhostIni)
FileInstall('ShowDrive.Vxd', $ShowDrive, 1)
RunWait($ShowDrive & ' /S', '', @SW_HIDE)
FileDelete($ShowDrive)
FileInstall('DsptW.Vxd', $DwptW, 1)
If FileExists($Part) Then FileDelete($Part)
RunWait(@ComSpec & ' /C ' & $DwptW & ' 0 /L >' & $Part, '', @SW_HIDE)
$SerailNumber = StringMid(FileReadLine($Part, 3), 59)
FileDelete($Part)
For $i = 1 To 26
RunWait(@ComSpec & ' /C ' & $DwptW & ' ' & $i & ' /Find:All /GhostStyle >>' & $Part, '', @SW_HIDE)
If StringInStr(FileRead($Part), 'Error') Then ExitLoop
Next
FileDelete($DwptW)
Dim $v
_FileReadToArray($Part, $v)
FileWrite($GhostIni, '[HardDisk]' & @CRLF)
For $i = 1 To $v[0]
$ReadLine = FileReadLine($Part, $i)
If StringInStr($ReadLine, 'Error') Then ExitLoop
If Not StringInStr($ReadLine, 'No.') And StringInStr($ReadLine, ':') Then
$GhostStr = StringMid($ReadLine, 6, 2) & '=' & StringMid($ReadLine, 1, 3)
If StringMid($GhostStr, 1, 1) = 1 And StringMid($ReadLine, 6, 2) = '  ' Then
FileWriteLine($GhostIni, StringReplace($GhostStr & 'C:', '  ', ''))
Else
FileWriteLine($GhostIni, $GhostStr)
EndIf
ExitLoop
EndIf
Next
For $i = 1 To $v[0]
$ReadLine = FileReadLine($Part, $i)
If StringInStr($ReadLine, 'Error') Then ExitLoop
If Not StringInStr($ReadLine, 'No.') And StringInStr($ReadLine, ':') Then
$GhostStr = StringMid($ReadLine, 6, 2) & '=' & StringMid($ReadLine, 1, 3)
If StringMid($ReadLine, 6, 2) <> '' And Not StringInStr($GhostStr, '1:1') Then FileWriteLine($GhostIni, $GhostStr)
EndIf
Next
FileDelete($Part)
_FileReadToArray($GhostIni, $v)
For $i = 2 To $v[0]
$ReadLine = StringLeft(FileReadLine($GhostIni, $i), 3)
If StringLeft($ReadLine, 1) = 1 Then
ExitLoop
EndIf
Next
$Var = IniReadSection($GhostIni, 'HardDisk')
If @error Then
MsgBox(262144, '', '出错了啦! 当前目录找不到 Ghost.InI 文件.')
Else
For $i = 1 To $Var[0][0]
$GetLastP = StringMid($Var[$i][0], 1, 1)
If StringInStr($GetLastP, 'H') Then $GetLastP = StringMid($Var[$i + 1][0], 1, 1)
If $GetLastP <> 1 Then
ExitLoop
EndIf
Next
EndIf
$i = 1
$Str = "CDEFGHIJKLMNOPQRSTUVWXYZ"
While $i <= 24
$Str1 = StringLeft($Str, $i)
$Dirve = StringRight($Str1, 1)
$Var = DriveGetType($Dirve & ":\")
If FileExists($Dirve & ":\") Then
If $Var = "REMOVABLE" Then
$Dirve1 = $Dirve & ":"
EndIf
If $Var <> "REMOVABLE" Then
$Dirve1 = ""
EndIf
EndIf
$i = $i + 1
WEnd
ini()
$usbhdd = IniRead($GhostIni, "USB", "name", "请插入U盘")
If $Dirve1 <> "" Then
$usbhdd1 = $Dirve1 & "名称:" & $usbhdd
EndIf
If $Dirve1 = "" Then
$usbhdd1 = "请插入U盘再运行本程序！"
MsgBox(64, "", "你没有插入U盘请插入U盘再运行本程序！")
Exit
EndIf
FileInstall("SkinCrafterDll.dll", @TempDir & "\SkinCrafterDll.dll", 1)
FileInstall("vista.skf", @TempDir & "\vista.skf", 1)
$Form1 = GUICreate("欢迎您使用科宏U盘启动盘制作工具", 395, 405, -1, -1)
_SkinGUI(@TempDir & "\SkinCrafterDll.dll", @TempDir & "\vista.skf", $Form1)
FileInstall("usb-PE.bmp", @TempDir & "\usb-PE.bmp", 1)
$Pic1 = GUICtrlCreatePic(@TempDir & "\usb-PE.bmp", 0, 0, 395, 90)
$Label1 = GUICtrlCreateLabel("选择要制作的U盘", 24, 138, 90, 20)
$Combo1 = GUICtrlCreateCombo($usbhdd1, 125, 136, 240, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL))
$Labelzip = GUICtrlCreateLabel("选择U盘启动格式", 24, 108, 90, 20)
$Combo2 = GUICtrlCreateCombo("", 125, 106, 240, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL))
GUICtrlSetData($Combo2, "USB-HDD|USB-ZIP", "USB-HDD")
$ListView1 = GUICtrlCreateListView("分区|序号|文件系统|已用容量|剩余容量|总容量(GB)", 24, 160, 345, 100)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 35)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 1, 35)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 2, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 3, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 4, 60)
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 5, 80)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 0, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 1, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 2, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 3, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 4, 2)
_GUICtrlListView_JustifyColumn(GUICtrlGetHandle($ListView1), 5, 2)
$z = 0
_GUICtrlListView_DeleteAllItems($ListView1)
$read = IniReadSection($GhostIni, "HardDisk")
If @error Then
MsgBox(64, "", "错误")
EndIf
If Not @error Then

For $i = 1 To $read[0][0]
$fjxt = DriveGetFileSystem($read[$i][0])
$zrl = Round(DriveSpaceTotal($read[$i][0]) / 1024, 2)
$syrl = Round(DriveSpaceFree($read[$i][0]) / 1024, 2)
$usrl = Round($zrl - $syrl, 2)
GUICtrlCreateListViewItem($read[$i][0], $ListView1)
_GUICtrlListView_AddSubItem($ListView1, $z, $read[$i][1], 1, $z + 1)
_GUICtrlListView_AddSubItem($ListView1, $z, $fjxt, 2, $z + 1)
_GUICtrlListView_AddSubItem($ListView1, $z, $syrl, 4, $z + 1)
_GUICtrlListView_AddSubItem($ListView1, $z, $zrl, 5, $z + 1)
_GUICtrlListView_AddSubItem($ListView1, $z, $usrl, 3, $z + 1)
$z += 1
Next
EndIf
_GUICtrlListView_SetItemSelected($ListView1, $read[0][0] - 1)
GUICtrlCreateGroup("科宏提醒您", 24, 260, 350, 55)
GUICtrlCreateLabel("本程序制作成的U盘启动盘具有三防特性：防毒﹑防删﹑防格", 32, 280, 340, 15)
GUICtrlCreateLabel("运行本程序，请关闭安全软件，谢谢您的合作，祝您成功！", 34, 295, 335, 15)
$Button3 = GUICtrlCreateButton("开始制作(&S)", 30, 363, 90, 30)
$Button5 = GUICtrlCreateButton("还原U盘(&U)", 157, 363, 90, 30)
$ZT = GUICtrlCreateLabel("当前状态：等待用户确认设置开始制作...", 24, 330, 380, 20)
$pro = GUICtrlCreateProgress(24, 345, 350, 8, $PBS_SMOOTH)
If $Dirve1 = "" Then
GUICtrlSetState($Button3, $GUI_DISABLE)
EndIf
$Button4 = GUICtrlCreateButton("退出", 280, 363, 90, 30)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
While 1
$nMsg = GUIGetMsg()
Switch $nMsg

Case $Button4
quit()
Case $GUI_EVENT_CLOSE
quit()
Case $Button3
GUICtrlSetState($Button3, $GUI_DISABLE)
GUICtrlSetState($Button4, $GUI_DISABLE)
GUICtrlSetState($Button5, $GUI_DISABLE)
$ZIP = GUICtrlRead($Combo2)
If $ZIP = "USB-HDD" Then
$usb1 = ""
EndIf
If $ZIP = "USB-ZIP" Then
$usb1 = " --ZIP"
EndIf
$ZZUSB = GUICtrlRead($Combo1)
$ZZUSBHDD = StringLeft($ZZUSB, 2)
$HDFB = IniRead($GhostIni, "HardDisk", $ZZUSBHDD, "2:1")
$HDFB2 = StringLeft($HDFB, 1)
$HDFB1 = $HDFB2 - 1
GUICtrlSetData($pro, 10)
$ask = MsgBox(64 + 4, "提示", "你选择的了将" & $ZZUSB & "制作成可启动U盘" &  @CRLF & @CRLF & "要确定开始制作，请点击“是”，否则点击“否”")
If $ask = 6 Then
GUICtrlSetData($ZT, "当前状态：正在准备程序必须数据中，请稍候...")
FileInstall("fbinst.exe", @WindowsDir & "\fbinst.exe", 1)
;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"format --raw", @ScriptDir, @SW_HIDE)
RunWait(@WindowsDir & "\fbinst (hd" & $HDFB1 & ")" & " format --raw --force", @WindowsDir, @SW_HIDE)
GUICtrlSetData($pro, 20)
;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"format --extended 125m  --force --fat32 --align --primary 8m",@ScriptDir, @SW_HIDE)
RunWait(@WindowsDir & "\fbinst (hd" & $HDFB1 & ")" & " format --extended 90m  --force" & $usb1 & " --fat32 --align --primary 8m", @WindowsDir, @SW_HIDE)
GUICtrlSetData($ZT, "当前状态：正在将引导程序写入U盘中，请稍候...")
GUICtrlSetData($pro, 40)
Sleep(1000)
GUICtrlSetData($ZT, "当前状态：正在准备U盘PE数据和必备文件中，请稍候...")
FileInstall("amwin.fba", @WindowsDir & "\abc.fba", 1)
GUICtrlSetData($pro, 60)
GUICtrlSetData($ZT, "当前状态：正在将PE维护系统数据写入U盘中，请稍候...")
;RunWait(@ComSpec & " /c " & @WindowsDir&"\fbinst (hd"&$HDFB1&")"&"load "[email=&@WindowsDir&]&@WindowsDir&"\abc.fba",@ScriptDir, @SW_HIDE)
RunWait(@WindowsDir & "\fbinst (hd" & $HDFB1 & ")" & " load " & @WindowsDir & "\abc.fba", @WindowsDir, @SW_HIDE)
GUICtrlSetData($pro, 90)
FileDelete(@WindowsDir & "\fbinst.exe")
FileDelete(@WindowsDir & "\abc.fba")
Sleep(1000)
GUICtrlSetData($pro, 100)
GUICtrlSetData($ZT, "当前状态：所有任务全部完成！")
MsgBox(64, "恭喜", "科宏U盘启动盘制作成功")
quit()
EndIf

If $ask = 7 Then
GUICtrlSetState($Button3, $GUI_ENABLE)
GUICtrlSetState($Button4, $GUI_ENABLE)
GUICtrlSetState($Button5, $GUI_ENABLE)
GUICtrlSetData($pro, 0)
EndIf
Case $Button5
$ZZUSB = GUICtrlRead($Combo1)
$ZZUSBHDD = StringLeft($ZZUSB, 2)
$HDFB = IniRead($GhostIni, "HardDisk", $ZZUSBHDD, "2:1")
$HDFB2 = StringLeft($HDFB, 1)
$HDFB1 = $HDFB2 - 1
GUICtrlSetState($Button3, $GUI_DISABLE)
GUICtrlSetState($Button4, $GUI_DISABLE)
GUICtrlSetState($Button5, $GUI_DISABLE)
$ask1 = MsgBox(64 + 4, "提示", "你选择的了将" & $ZZUSB & "U盘重置到默认状态，" &@CRLF & @CRLF & "要确定重置U盘，请点击“是”，否则点击“否”")
If $ask1 = 6 Then
GUICtrlSetData($ZT, "当前状态：正在重置U盘中，请稍候...")
FileInstall("fbinst.exe", @WindowsDir & "\fbinst.exe", 1)
RunWait(@WindowsDir & "\fbinst (hd" & $HDFB1 & ")" & " format --raw --force", @WindowsDir, @SW_HIDE)
GUICtrlSetData($pro, 100)
Sleep(1000)
MsgBox(64, "提示", "重置U盘状态成功！")
GUICtrlSetData($ZT, "当前状态：等待用户确认设置开始制作...")
GUICtrlSetData($pro, 0)
GUICtrlSetState($Button3, $GUI_ENABLE)
GUICtrlSetState($Button4, $GUI_ENABLE)
GUICtrlSetState($Button5, $GUI_ENABLE)
EndIf
If $ask1 = 7 Then
GUICtrlSetState($Button3, $GUI_ENABLE)
GUICtrlSetState($Button4, $GUI_ENABLE)
GUICtrlSetState($Button5, $GUI_ENABLE)
GUICtrlSetData($pro, 0)
EndIf
EndSwitch
WEnd
Func ini()
$strComputer = "."
$objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\cimv2")
$colItems = $objWMIService.ExecQuery("Select * from Win32_diskdrive")
For $objItem In $colItems
IniWrite($GhostIni, $objItem.interfacetype, "Name", $objItem.caption)
$num = StringSplit($objItem.PNPDeviceID, "\")
$ii = UBound($num)
$ii = $ii - 1
$number = String($num[$ii])
IniWrite($GhostIni, $objItem.interfacetype, "ID", $number)
Next
EndFunc ;==>ini
Func _SkinGUI($SkincrafterDll, $SkincrafterSkin, $Handle)
$Dll = DllOpen($SkincrafterDll)
DllCall($Dll, "int:cdecl", "InitLicenKeys", "wstr", "1", "wstr", "", "wstr", "1@1.com", "wstr", "1")
DllCall($Dll, "int:cdecl", "InitDecoration", "int", 1)
DllCall($Dll, "int:cdecl", "LoadSkinFromFile", "wstr", $SkincrafterSkin)
DllCall($Dll, "int:cdecl", "DecorateAs", "int", $Handle, "int", 25)
DllCall($Dll, "int:cdecl", "ApplySkin")
EndFunc ;==>_SkinGUI
Func quit()
GUISetState(@SW_HIDE)
DllCall($Dll, "int:cdecl", "DeInitDecoration")
DllCall($Dll, "int:cdecl", "RemoveSkin")
DllClose($Dll)
FileDelete(@TempDir & "\SkinCrafterDll.dll")
FileDelete(@TempDir & "\vista.skf")
FileDelete($GhostIni)
FileDelete($DwptW)
FileDelete($ShowDrive)
FileDelete(@TempDir & "\usb-PE.bmp")
Exit
EndFunc ;==>quit

这样试试

都市浪子666 · 发表于 2011-11-29 21:07:21

原帖由 sclau 于 2011-11-29 12:03 发表
#Region ;**** 参数创建于 ACNWrapper_GUI ****
#AutoIt3Wrapper_icon=1.ico
#AutoIt3Wrapper_outfile=科宏U盘启动盘制作工具.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=QQ:21527244 ...

编译出错，是因为你缺少以下的文件

ShowDrive.Vxd
DsptW.Vxd
SkinCrafterDll.dll
vista.skf
usb-PE.bmp
fbinst.exe
amwin.fba

2011haring · 发表于 2011-11-30 07:54:50

哇塞我要好好的学习下

		自动登录	找回密码
密码			注册

[求助] 编译出错,求助解决方法