谁有primo的命令行帮助文件

kkkssc · 发表于 2020-1-2 20:28:13

谁有primo的命令行帮助文件啊，想写个命令行，官网找了半天都没有。。。

会的帮忙看看这个怎么写，6.3.1版本的，延时加载，完全镜像～不保存

y7y007 · 发表于 2020-1-2 21:31:06

rxprd.exe

C:\Program Files\Primo Ramdisk>rxprd.exe
Primo Ramdisk Unknown Edition Commander  Version 6.2.0
Copyright (C) Romex Software. All rights reserved.

Usage: rxprd.exe <command> [<option>...]

<command> Specifies a Primo Ramdisk command (see command list below).
<option>...  One or more options that modify a command.

The following conventions are used in the command line:
  Expressions surrounded by angle brackets (<>) are required.
  Expressions surrounded by square brackets ([]) are optional.
  Commands are case insensitive, but options are case sensitive.

Command List
------------
ls          Lists all virtual disks.
add       Creates a new virtual disk.
del       Removes a virtual disk.
view       Displays the settings and status of a virtual disk.
edit       Changes the settings of a virtual disk.
rebuild    Recreates the disk with new settings.
init       Reinitializes a virtual disk.
save       Saves the disk contents to an image file.
export    Exports the disk settings as a disk descriptor file.
im          Manages the Invisible Memory.
mem       Displays current system memory information.
ver       Displays version and license information.
?          Displays help messages.

For detailed command and option information, type: rxprd.exe ? <command>. For ex
ample,
to display detailed information about the add command, type:

rxprd.exe ? add

C:\Program Files\Primo Ramdisk>
C:\Program Files\Primo Ramdisk>rxprd.exe ? add
Primo Ramdisk Add Command
Creates a new virtual disk.

rxprd.exe add [-n <disksize>] [-t <disktype>] [-d <letter>] [-v]
  [-m[=<mode>]] [-i[=<quota>]] [-p <file>[?<size>]]
  [-f <filesys>] [-c <clussize>] [-l <label>] [-X] [-N]
  [-Q <permission>] [-T] [-r <folders>] [-z <volsn>]
  [-I <file> [-L] [-D] [-F <format>] [-K <intval>]]
  [-s]

  Basic Options
  -------------
  -n, -size <disksize>       - Specifies the disk size in megabytes (MB).
                              If not specified, 128 is the default.
  -t, -type <disktype>       - Specifies the disk type. <disktype> can be
                              one of SCSI or DIO.
                              If not specified, SCSI is the default.
  -d, -drive <letter>       - Assigns a drive letter to the new volume.
                              If not specified, the last available drive
                              letter is assigned.
  -v, -volatile             - Sets the new disk as a temporary disk. The
                              disk will disappear at the next computer boot.

  Component Options
  -----------------
  -m, -dmm[=<mode>]          - Enables Dynamic Memory Management (DMM)
                              feature. <mode> can be one of COMPACT and
                              NORMAL.
                                 COMPACT - enables Compact Mode
                                 NORMAL  - disables Compact Mode
                              <mode> is optional, and if not specified,
                              NORMAL is the default.
  -i, -im[=<quota>]          - Uses Invisible Memory to constitute the disk.
                              <quota> specifies the maximum amount of
                              Invisible Memory, in megabytes (MB), that can
                              be used for this new disk. <quota> is optional,
                              and if not specified all available Invisible
                              Memory can be used.
  -p, -pd <file>[?<size>]    - Uses physical drive to constitute the disk.
                              <file> specifies the file name including the
                              full path. <size> specifies the amount of
                              physical drive space, in megabytes (MB), used
                              for this virtual disk. <size> is optional,
                              and if not specified it equals to <disksize>.
  File System Options
  -------------------
  -f, -fs <filesys>          - Specifies the type of file system. <filesys>
                              can be NTFS, FAT, FAT32 or exFAT.
                              If not specified, FAT32 is the default.
  -c, -clus <clussize>       - Overrides the default allocation unit (cluster)
                              size. <clussize> can be one of the following:
                              512, 1KB, 2KB, 4KB, 8KB, 16KB, 32KB, 64KB,
                              128KB, 256KB, or 512KB.
                              Note: Minimum and maximum allowed cluster size
                              depend on disk size and file system.
  -l, -label <label>       - Specifies the volume label.
  -X, -nc                   - NTFS only: Enables NTFS compression.
  -N, -nni                   - NTFS only: Disables NTFS indexing service.
  -Q, -np <permission>       - NTFS only: Sets the permissions for "Everyone"
                              account. <permission> can be a combination of
                              the following: F, M, X and/or W.
                                 F (f) - full control
                                 M (m) - modify
                                 X (x) - read & execute
                                 W (w) - write
                              Use '?' to combine two or more permissions.
                              Example: -Q x?w
  -T, -temp                - Automatically creates a folder named "TEMP".
  -r, -dir <folders>       - Automatically creates up to 10 custom folders.
                              Use '?' to concatenate multiple folders.
                              Example: -r aaa?bbb?ccc
                              creates three folders: aaa, bbb and ccc.
  -z, -vsn <volsn>          - Specifies the volume serial number.
                              If not specified, a random serial will be used.

  Image File Options
  ------------------
  -I, -image <file>          - Associates a backing image file for the disk.
                              <file> specifies the image file name including
                              the full path.
  -L, -nosave                - Sets the associated image file as Load Only.
                              The disk will automatically loads the contents
                              from the image file, but will not save any
                              changes of contents to the image file.
  -D, -delay                - Enables Delay Load mode.
  -F, -format <format>       - Specifies the file format for saving the image
                              file. <format> can be one of FLAT, COMPACT or
                              COMPR. For format COMPR, appends "?<level>" to
                              specify the image file compression level.
                              <level> can range from 1 to 9. <level> is
                              optional, and if not specified default is 1.
                              Examples:
                                 -F flat
                                 -F compact
                                 -F compr
                                 -F compr?2
  -U, -shutsave             - Automatically save the disk contents to the
                              associated image file before the computer is
                              shutdown or rebooted.
                              If -L is not specified, this option is enabled
                              by default. If you want to disable this option,
                              use -U=0.
  -H, -hibersave             - Automatically save the disk contents to the
                              associated image file before the computer
                              enters the hibernate state.
  -E, -sleepsave             - Automatically save the disk contents to the
                              associated image file before the computer
                              enters the sleep state.
  -K, -timing <intval>       - Periodically save the disk contents to the
                              associated image file at a specified time
                              interval. <intval> specifies the saving
                              intervals in minutes.

  Other Options
  -------------
  -s, -silent                - Executes this command in silent mode. No
                              interactive prompts and running information.
                              Errors or warnings are still displayed.

Remarks:

Option '-p' overrides all image file options.
Option '-I' is required for other image file options.
Option '-L' overrides options '-F', '-U', '-H', '-E' and '-K'.
Option '-p' and image file options are not available in Standard Edition.

Examples:

The following command creates a 128MB SCSI RAM-disk with all default settings:

rxprd.exe add

The following command creates a 4GB Direct-IO RAM-disk formatted with NTFS file
system which specifies 4KB cluster size, "TEMP" folder, and custom folders
"folder 1" and "folder 2":

rxprd.exe add -n 4096 -t dio -f ntfs -c 4KB -T -r "folder 1?folder 2"

The following command creates a 8GB SCSI hybrid-disk with 5GB physical memory
and 3GB physical drive, enabling Invisible Memory (quota: 1GB) and DMM:

rxprd.exe add -n 8192 -i=1024 -m -p "c:\hybrid.hbd?3072"

The following command creates a 8GB SCSI RAM-disk with an image file, loading
at computer startup and saving at shutdown:

rxprd.exe add -n 8192 -I "c:\image file.vdf" -F flat

C:\Program Files\Primo Ramdisk>

kkkssc · 发表于 2020-1-2 21:42:44

本帖最后由 kkkssc 于 2020-1-2 22:33 编辑

y7y007 发表于 2020-1-2 21:31
rxprd.exe

大虾就是大虾，我用 "rxprd.exe /?" 整了半天就是没调出来帮助

set rxprd="C:\Program Files\Primo Ramdisk Server Edition\rxprd.exe"

set vdffile="D:\500MB.vdf"
set size=500

taskkill /f /im FancyRd.exe 1>nul 2>nul
@ping 127.0.0.1 -n 2 >nul

%rxprd% add -n %size% -t SCSI -d z: -dmm=compact -im -fs NTFS -c 1KB -l RamDisk -N -I %vdffile% -L -D -F plain -s 1>nul 2>nul

实验了一下，不行，大虾看看上面脚本

sairen139 · 发表于 2020-1-2 21:57:39

y7y007 发表于 2020-1-2 21:31
rxprd.exe

请教一个技术问题，一个开机延时加载的ramos的系统vdf，怎么在进入桌面后再行把这个vdf全搞到内存里？

kkkssc · 发表于 2020-1-2 22:31:47

sairen139 发表于 2020-1-2 21:57
请教一个技术问题，一个开机延时加载的ramos的系统vdf，怎么在进入桌面后再行把这个vdf全搞到内存里？

即时加载，但是开机会变慢，延时加载，就不会全进内存；所以：建议建立一个bat，设置成开机启动，然后把这个bat指向建立一个内存盘

kkkssc · 发表于 2020-1-2 23:19:49

本帖最后由 kkkssc 于 2020-1-2 23:22 编辑

研究半天终于解决了，共享给群友，大家友爱互助～～～

原来要延时加载的前提是必须先有镜像，实验脚本如下：

echo 延时加载不保存完全镜像，命令行，字符顺序不能改～

下面对应的磁盘序数和路径可以自己改一下

set rxprd="C:\Program Files\Primo Ramdisk Server Edition\rxprd.exe"

set vdffile="d:\500MB.vdf"
set size=500

taskkill /f /im FancyRd.exe 1>nul 2>nul
@ping 127.0.0.1 -n 2 >nul

%rxprd% add -n %size% -t SCSI -d z: -dmm=compact -im -fs NTFS -c 1KB -l RamDisk -N -I %vdffile% -L -D -F plain -s 1>nul 2>nul

@ping 127.0.0.1 -n 3 >nul

%rxprd% save 2 -g -s 1>nul 2>nul

@ping 127.0.0.1 -n 3 >nul

%rxprd% del 2 -g -s 1>nul 2>nul

@ping 127.0.0.1 -n 3 >nul

%rxprd% add -n %size% -t SCSI -d z: -dmm=compact -im -fs NTFS -c 1KB -l RamDisk -N -I %vdffile% -L -D -F plain -s 1>nul 2>nul

start /d "C:\Program Files\Primo Ramdisk Server Edition" FancyRd.exe

@echo 可以查看下建立的ramdisk属性了，任意键后自动删除关闭～

pause

taskkill /f /im FancyRd.exe 1>nul 2>nul

%rxprd% del 2 -g -s 1>nul 2>nul

@ping 127.0.0.1 -n 3 >nul

del /f /q %vdffile%

exit

		自动登录	找回密码
密码			注册

谁有primo的命令行帮助文件

点评

点评