无忧启动论坛»论坛 › ::启动制作:: › 综合讨论区 › 360看图，360家族中唯一的奇葩，太过良心，被自家人给灭 ...

360看图，360家族中唯一的奇葩，太过良心，被自家人给灭了

查看数: 37241 | 评论数: 196 | 收藏 29

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

2010feicool

发布时间: 2021-10-16 18:03

正文摘要:

本帖最后由 2010feicool 于 2021-10-24 18:31 编辑这看图工具是18年最终更新的独立版本，经测试100M大图也是秒开，太好用了才被360干掉而360压缩工具中提取的版本，先不说不支持WEBP格式，比比看，那速度真是 ...

cfq001 发表于 2025-5-21 09:39:32

感谢分享

bilvnet 发表于 2025-5-21 09:35:57

reg delete "HKCR\PhotoViewer.FileAssoc.Jpeg" /f
reg delete "HKCR\PhotoViewer.FileAssoc.Png" /f
reg delete "HKCR\.jpeg" /f
reg delete "HKCR\.png" /f

reg add "HKCR\360AblumViewer\shell\open" /f /ve /t REG_SZ /d "用 360看图查看"
reg add "HKLM\SOFTWARE\Classes\Directory\shell\360AblumViewer" /f /ve /t REG_SZ /d "用 360看图浏览"
这6条好像没变化，重启电脑后，jpeg、png文件右键和右键打开方式都没有 "用 360看图查看""用 360看图浏览"，只有右键打开方式里多了个【360看图】。

系统ltsc 2021 19044.5198

Erpf 发表于 2025-5-21 09:27:40

谢谢分享

mianaa 发表于 2025-5-21 09:24:58

谢谢分享！！！

bilvnet 发表于 2025-5-21 09:21:15

rgy所说抄袭JPEGView是真的，不信看下【360AblumViewer.ini】配置文件

JPEGView v1.0.37.1（21年4月15号左右发布）的配置文件

[JPEGView]
; Language used in the user interface. Set to 'auto' to use the language of the operating system.
; Other languages must use the ISO 639-1 language code (two letters)
; Currently supported:
; 'en' English (default)
; 'es' Spanish (Spain)
; 'es-ar' Spanish (latinoamerica)
; 'pt-br' Portuguese (Brasil)
; 'pt' Portuguese
; 'de' German
; 'it' Italian
; 'fr' French
; 'zh' Chinese
; 'zh-tw' Chinese (Taiwan)
; 'ja' Japanese
; 'kr' Korean
; 'ro' Romanian
; 'ru' Russian
; 'sv' Swedish
; 'cs' Czech
; 'el' Greek
; 'eu' Basque
; 'bel' Belorussian
; 'uk' Ukrainian
; 'pl' Polish
Language=auto
; File endings of files to be decoded by WIC (Windows Image Converter)
; If the Microsoft Camera Codec pack is installed, full size camera RAW files can be read with WIC
; Add the file endings of the raw files to view here, e.g.
; FilesProcessedByWIC=*.wdp;*.hdp;*.jxr;*.nef
FilesProcessedByWIC=*.wdp;*.hdp;*.jxr
; File endings of camera RAW files to be searched for embedded JPEG thumb images to display
; Reading just these embedded JPEGs is much faster than decoding the RAW using WIC
FileEndingsRAW=*.pef;*.dng;*.crw;*.nef;*.cr2;*.mrw;*.rw2;*.orf;*.x3f;*.arw;*.kdc;*.nrw;*.dcr;*.sr2;*.raf
; If true, reloads the currently displayed image automatically when it is changed by an external program on disk.
; Also reloads the image list when a file in the current directory is added or deleted.
; Set to false to turn off this behavior.
ReloadWhenDisplayedImageChanged=true
; Background color, R G B, each component must be in [0..255], e.g. "128 128 128" for a middle gray
BackgroundColor=0 0 0
; Color used for transparent parts of images, R G B format as used by BackgroundColor
TransparencyColor=0 0 0
; GUI colors, R G B format as used by BackgroundColor
GUIColor=243 242 231
HighlightColor=255 205 0
SelectionColor=255 205 0
SliderColor=255 0 80
FileNameColor=255 255 255
; GUI font, format: "font name" fontSizeInPoints [bold]
; 'Default' for the default GUI font of Windows
; Example: DefaultGUIFont="Arial" 9.0 bold
DefaultGUIFont=Default
; Contrast correction to apply to all images. Must be in -0.5 .. 0.5
; Values > 0 increase contrast, values < 0 decrease contrast
Contrast=0.0
; Gamma correction to apply to all images. Must be between 0.5 and 2
; Use gamma<1 to increase brightness and gamma>1 to decrease brightness
Gamma=1.0
; Color saturation to apply to all images. Must be in 0.0 .. 2.0
; 0.0 means gray scale image, 1.0 no additional color saturation, 2.0 maximal saturation
Saturation=1.0
; Sharpening to apply for downsampled images. Must be in 0 .. 0.5
; Note that for 100 % zoom, the BestQuality filter will not apply any sharpening, only the other filters do
Sharpen=0.3
; Default parameters for unsharp masking: Radius Amount Threshold
; Note that no unsharp masking can be applied automatically to every image - this setting only provides the default parameters
; when entering the unsharp mask mode
UnsharpMaskParameters=1.0 1.0 4.0
; Default parameters for controlling rotation and perspective correction
RTShowGridLines=true
RTAutoCrop=true
RTPreserveAspectRatio=true
; Default color balance. Negative values for C,M,Y correction, positive for R,G,B.
; Values must be in -1.0 .. +1.0
CyanRed=0.0
MagentaGreen=0.0
YellowBlue=0.0
; Set to true to use high quality sampling as default.
HighQualityResampling=true
; Start in full screen or windowed mode
; 'true' or 'false' to always start in full screen, respectively windowed mode
; 'auto' to choose best mode depending on image size of first image - windowed when it is small, full screen when it is large
ShowFullScreen=auto
; Sets the default position and size of the window in window mode. Possible values:
; 'auto' for 2/3 of screen size
; 'max' to start with maximized window
; 'image' to adjust the window size automatically to the image size
; 'sticky' to automatically restore the last used window size (when ShowFullScreen=auto only the upper,left position is restored)
; 'left top right bottom', space separated e.g: 100 100 900 700
DefaultWindowRect=image
; Contains the stored window rectangle in case of DefaultWindowRect=sticky
StickyWindowRect=
; Minimal window size in windowed mode (in pixels)
MinimalWindowSize=320 240
; The initial crop window size when using 'Fixed Size' crop mode
DefaultFixedCropSize=320 200
; User defined crop aspect ratio (x y), meaning (x : y)
UserCropAspectRatio=1 1
; Set to true to initially display the file name of each image in the upper, left corner of the screen
ShowFileName=false
; The elements to show when showing the file name.
; Possible elements:
; %filename% : File name
; %filepath% : File name and path
; %index% : Index of image in folder, e.g. [1/12]
; %zoom% : Current zoom factor
; %size% : Size of image in pixels (w x h)
; %filesize% : Size of image on disk
FileNameFormat=%index% %filepath%
; Font for the file name display, see DefaultGUIFont key for the format
FileNameFont=Default
; Set to true to initially display the file info box (EXIF info if available)
ShowFileInfo=false
; Show the acquisition date from EXIF data in the window title
ShowEXIFDateInTitle=true
; Set to true to show the histogram on the file info panel by default
ShowHistogram=false
; Set to true to show JPEG comments (EXIF user comment, EXIF image description or JPEG comment) in the file info box
ShowJPEGComments=true
; Set to true to show the bottom panel when moving the mouse to the bottom of the screen/window.
; The bottom panel provides basic image processing functionality
ShowBottomPanel=true
; Set to false if the navigation panel shall not be blended to the image
ShowNavPanel=true
; Set to false to disable the thumbnail image blended in during zoom and pan
ShowZoomNavigator=true
; Blending factor of the navigation panel when the mouse is not on that panel. Set to 0.0 to only
; show the panel when the mouse is over the panel
BlendFactorNavPanel=0.5
; Scaling factor for the navigation panel. Increase if the buttons on the panel are too small, e.g. on a touchscreen.
ScaleFactorNavPanel=1.0
; Set to true to keep the zoom, pan, contrast, gamma, sharpen and rotation setting between the images
KeepParameters=false
; CPUType can be AutoDetect, Generic, MMX, SSE or AVX2
; Generic should work on all CPUs, MMX needs at least MMX II (starting from PIII)
; Use AutoDetect to detect the best possible algorithm to use
CPUType=AutoDetect
; Number of CPU cores used. Set to 0 for auto detection.
; Must be 1 to 4, or 0 for auto detect.
CPUCoresUsed=0
; Default print margin (all sides) in centimeters
PrintMargin=1.0
; Default print width in centimeters. Use negative numbers to set the 'Fit to paper' printing mode.
PrintWidth=-15.0
; Units (centimeters, inches) used, one of 'auto', 'metric' or 'english'.
; 'auto' uses the system setting
; 'metric' uses the metric system, e.g. centimeters for length
; 'english' uses the English/US system, e.g. inches for length
Units=auto
; DownSamplingFilter can be BestQuality, NoAliasing or Narrow
; The BestQuality filter produces a very small amount of aliasing.
; The NoAliasing filter is a Lanczos filter that has almost no aliasing when sharpen is set to zero
; The Narrow filter produces quite a lot of aliasing but will sharpen much and also sharpens 100% images
DownSamplingFilter=BestQuality
; Sorting order of the files when displaying the image files in a folder
; Can be LastModDate, CreationDate, FileName, FileSize or Random
FileDisplayOrder=LastModDate
; Sort files upcounting or downcounting
IsSortedUpcounting=true
; Navigation within or between folders
; LoopFolder : Loop within the source folder and never leave this folder
; LoopSameFolderLevel: Loop to next folder on the same hierarchy level (sibling folders)
; LoopSubFolders: Loop into subfolders of the source folder
FolderNavigation=LoopFolder
; If true, the mouse wheel can be used to navigate forward and backward and zoom must be done with Ctrl-MouseWheel
; If false, zoom is done with the mousewheel (no Ctrl required)
NavigateWithMouseWheel=false
; Zoom speed with mouse wheel, 1.0 means default speed, smaller values slower zoom, larger faster zoom
MouseWheelZoomSpeed=1.0
; Minimal display time of an image when using the PgDn/PgUp keys (in milliseconds [0..1000 ms])
MinimalDisplayTime = 0.0
; If true, the extended mouse buttons (Forward and backward) are exchanged compared to Internet explorer
; This is useful to put the 'go to next image' functionality to the button that is better reachable
ExchangeXButtons=true
; If true the files in a folder are shown with wrap around, thus going from last to first image and vice versa
; If false navigation stops on the last and first image
WrapAroundFolder=true
; If true, JPEG images are auto rotated according to EXIF image orientation tag if present.
AutoRotateEXIF=true
; If true, embedded ICC color profiles are used for JPEG and TIFF. This forces using GDI+ for JPEGs and therefore
; results in much slower loading of JPEGs! Only set to true if you really need this.
UseEmbeddedColorProfiles=false
; Auto zoom mode (for window mode only if AutoZoomModeFullscreen is present)
; FitNoZoom : Fit images to screen, never enlarge image
; FillNoZoom : Fill screen with no black borders, crop if necessary but not too much, never enlarge image
; Fit : Fit images to screen
; Fill : Fill screen with no black borders, crop if necessary
AutoZoomMode=FitNoZoom
; Auto zoom mode for fullscreen mode. If empty, same value as 'AutoZoomMode' is used.
AutoZoomModeFullscreen=
; Maximum size of slide show text files in KB
MaxSlideShowFileListSizeKB=200
; Transition effect for slide shows in full screen mode - ignored when used in window mode
; Possible transition effects: None, Blend, SlideRL, SlideLR, SlideTB, SlideBT, RollRL, RollLR, RollTB, RollBT, ScrollRL, ScrollLR, ScrollTB, ScrollBT
SlideShowTransitionEffect=Blend
; Time of the slide show transition effect in milliseconds, only used in full screen mode
SlideShowEffectTime=250
; If set to true, only one single instance of JPEGView runs at any time, if false multiple instances are allowed
; Set to true to open all images in the same JPEGView window.
SingleInstance=false
; If set to true, only one single instance of JPEGView runs in full screen mode, if false multiple instances are allowed
; The value is ignored if SingleInstance=true
SingleFullScreenInstance=true
; Set to true to skip the 'File Open' dialog when starting JPEGView without providing a file name as parameter
SkipFileOpenDialogOnStartup=false
; Force using GDI+ for reading JPEGS. Only use when you have problems reading your JPEGs with the default Turbo JPEG library.
; Note that using GDI+ is slower than the Turbo JPEG library!
ForceGDIPlus=false
; Quality when saving JPEG files (in 0..100 where 100 is the highest quality)
JPEGSaveQuality=85
; Quality when saving WEBP files with lossy compression (in 0..100 where 100 is the highest quality)
WEBPSaveQuality=85
; Default format for saving files. Supported formats: jpg, bmp, png, tif, webp
DefaultSaveFormat=jpg
; Set to true to create a parameter DB entry when saving an image with JPEGView to avoid processing it again
CreateParamDBEntryOnSave=true
; If set to true, Ctrl-S overrides the original file on disk, applying the current processings without
; showing a dialog or prompting the user to confirm.
; CAUTION: Use at your own risk! Be aware that the original image file is overridden and cannot be restored anymore!
OverrideOriginalFileWithoutSaveDialog=false
; If set to true, lossless JPEG transformations will trim the image as needed without prompting the user.
; This will remove 15 pixel rows/columns at the image borders in worst case.
; CAUTION: Use at your own risk! Be aware that the original image file is overridden and the trimmed borders cannot be restored anymore!
TrimWithoutPromptLosslessJPEG=false
; Type of confirmation required when deleting a file with the 'x' button on the navigation panel
; Possible values: Never, OnlyWhenNoRecycleBin, Always
; OnlyWhenNoRecycleBin means to only require a confirmation when there is no recycle bin available (e.g. on memory sticks)
; Notice: Does not apply to deleting files with the Del key. To change this edit the KeyMap.txt and assign another command to the Del key.
DeleteConfirmation=OnlyWhenNoRecycleBin
; Set to false to disallow deletion of images in JPEGView. This hides the 'x' button on the navigation panel
; and disables the commands for deletion (IDM_MOVE_TO_RECYCLE_BIN etc.)
AllowFileDeletion=true
; Set to true to show the menu item that allows editing the global INI file
AllowEditGlobalSettings=false
; Only for multi-monitor systems!
; Monitor to start the application on
; -1: Use monitor with largest resolution, primary monitor if several monitors have the same resolution
; 0: Use primary monitor
; 1...n: Use the non-primary monitor with index n
DisplayMonitor=-1
; Automatic contrast correction by histogram equalization
; F5 enables/disables the correction on the current image.
AutoContrastCorrection=false
; Using the following two keys, it is possible to explicitly exclude/include folders from the contrast correction.
; More specific patterns have precedence over less specific patterns and inclusion has precedence over exclusion if
; a folder matches both. Example: '*\pics\orig\* has precedence over *\pics\* because it is more specific
; Use the ; character to separate two expressions.
; Example: ACCExclude=%mypictures%\Digicam\edited\*;*.bmp
; This will exclude all files in the ..\My Pictures\Digicam\edited\ folder and all its subfolders and all bmp files
; from automatic contrast correction.
; The following two placeholders are recognized:
; %mypictures% : "My documents\My Pictures" folder
; %mydocuments% : "My documents" folder
ACCExclude=
ACCInclude=
; Amount of automatic contrast correction
; 0 means no contrast correction, 1 means full (to black and white point) contrast correction. Must be in (0 .. 1)
AutoContrastCorrectionAmount=0.5
; Amount of color correction in the color channels reg, green, blue, cyan, magenta and yellow
; The numbers must be between 0.0 (no correction) and 1.0 (total correction towards the gray world model)
ColorCorrection = "R: 0.2 G: 0.1 B: 0.35 C: 0.1 M: 0.3 Y: 0.15"
; Amount of automatic brightness correction
; 0 means no brightness correction, 1 means full correction to middle gray. Must be in (0 .. 1)
AutoBrightnessCorrectionAmount=0.2
; Automatic correction of local density (local brightness of images)
; Can be enabled/disabled on the image with F6
LocalDensityCorrection=false
; See remark about exclusion/inclusion at the ACCExclude setting.
; The same applies to these settings.
LDCExclude=
LDCInclude=
; Amount of local density correction of shadows
; Can be in [0, 1]
LDCBrightenShadows=0.5
; Deep shadow steepness of enhancement
; Can be in [0, 1], values bigger than 0.9 are not recommended
LDCBrightenShadowsSteepness=0.5
; Amount of local density correction of highlights
; Can be in [0, 1]
LDCDarkenHighlights=0.25
; Parameter set used in landscape enhancement mode
; Space separated, use -1 to leave parameter untouched
; Contrast Gamma Sharpen ColorCorrection ContrastCorrection LightenShadows DarkenHighlights DeepShadows CyanRed MagentaGreen YellowBlue Saturation
LandscapeModeParams=-1 -1 -1 -1 0.5 1.0 0.75 0.4 -1 -1 -1 -1
; Set to true to turn on landscape enhancement mode automatically
LandscapeMode=false
; When setting a processed image as desktop wallpaper, the processed image must be saved somewhere.
; This INI setting sets the path to save the file. Default is %temp%, the system TEMP directory. You must have write access to the specified directory!
WallpaperPath=%temp%
; Editor for INI files
; notepad : Use notepad.exe
; system : Use application registered for INI files
; other : Full path to application for editing INI files, %exepath% placeholder can be used
IniEditor=notepad
; URL for the map provider to display GPS coordinates on a map
; OpenStreetmap: ww删w.openstreetmap.org/?mlat={lat}&mlon={lng}&zoom=15
; Google maps: http删s://w删ww.google.com/maps/search/?api=1&query={lat},{lng}
GPSMapProvider=http删s://opentopomap.org/#marker=15/{lat}/{lng}
; User commands
; User command must be named UserCmd# where # stands for a number. The first user command has the number zero (UserCmd0)
; and the numbering of the commands must be continuous.
; User command must have the following form:
; UserCmd#="KeyCode: %Key% Cmd: '%Cmd%' [Menuitem: '%menu%'] [Confirm: '%confirm%'] [HelpText: '%help%'] [Flags: '%flags%']"
; %Key% : Key that invokes the command. Do not define keys already used by JPEGView.
; The following keys are known: Alt, Ctrl, Shift, Esc, Return, Space, End, Home, Back, Tab, PgDn, PgUp,
; Left, Right, Up, Down, Insert, Del, Plus, Minus, Mul, Div, Comma, Period, A .. Z F1 .. F12
; Combine modifier keys with +, e.g. 'Alt+Ctrl+P'
; %Cmd% : Application to start, including command arguments. Enclose the application name with double quotes ("") if the path contains
; spaces. To execute command line commands or batch files, use 'cmd /c command' respectively 'cmd /c MyBatchFile.bat'.
; The following placeholders can be used in the %cmd% argument:
; %filename% : Filename of current image, including path
; %filetitle% : Filename of current image, excluding path
; %directory% : Directory or current image, without trailing backslash
; %mydocuments%: The 'My Documents' folder without trailing backslash
; %mypictures% : The 'My Pictures' folder without trailing backslash
; %exepath% : Path to EXE folder where JPEGView is running
; %exedrive% : Drive letter of the EXE path, e.g. "c:"
; The resulting names are enclosed with double quotes automatically by JPEGView when no backslash is before or after the placeholder.
; %menu% : The menu item text in the 'User Commands' sub-menu shown in the JPEGView context menu. If missing the command is not contained in the menu.
; %confirm% : Message text that is shown and must be confirmed before the command is executed.
; This is an optional argument, if not used, no confirmation is needed for the command.
; %help% : Help string that is displayed in JPEG view when F1 is pressed.
; This is an optional argument, if not used, no help text will be available.
; %flags% : The following flags are supported:
; NoWindow : For console applications - if set do not display a console window.
; If the started application is the command interpreter (cmd.exe) this flag is implicitly set.
; ShortFilename : If set, the short (8.3) file name (and path) is passed to the executing application.
; Set this flag if the executing application cannot handle long file names or files and path
; names containing spaces.
; WaitForTerminate : If set, JPEGView is blocked until the command has finished execution. If not set, the command is
; started and JPEGView continues.
; MoveToNext : If set, JPEGView moves to the next image in the folder after the command has been executed.
; Cannot be combined with the ReloadCurrent flag.
; ReloadFileList : If set, the file-list of the current folder is reloaded after execution of the command. Set this
; flag when the command modifies the content of the folder (e.g. moves, renames or deletes files).
; ReloadCurrent : If set, the currently shown file is re-loaded from disk after execution of the command.
; Set this flag if the command changes the pixel data of the current image.
; ReloadAll: If set, the file-list of the current folder is reloaded and the current image and all cached images
; are reloaded. Set this flag only if the command changes pixel data of images other than the current.
; KeepModDate: Keeps the modification date/time of the current image. Can be used to preserve this time stamp
; when modifications on the image are done to keep sort ordering.
; Caution: When using this flag, always combine with the WaitForTerminate flag!
; ShellExecute: Uses the ShellExecute() system call to start the external process instead of CreateProcess().
; Some applications do not start properly with CreateProcess(). If this flag is set, the WaitForTerminate
; must not be used. All flags requiring WaitForTerminate to be set must not be set either.
; Typically ShellExecute is set to start large external applications, e.g. an image editor.
UserCmd0="KeyCode: Shift+Del Cmd: 'cmd /c del %filename%' Confirm: 'Do you really want to permanently delete the file %filename%?' HelpText: 'Shift+Del\tDelete current file on disk permanently' Flags: 'WaitForTerminate ReloadFileList MoveToNext'"
; Here are some examples for user commands
;UserCmd1="KeyCode: P Cmd: 'C:\WINDOWS\system32\mspaint.exe /p %filename%' Menuitem: 'Print Image' Confirm: 'Do you really want to print the file %filename%?' HelpText: 'P\tPrint current image'"
;UserCmd2="KeyCode: Q Cmd: 'cmd /c move %filename% "%mypictures%\trash"' Confirm: 'Really move file to %mypictures%\trash\%filetitle%' HelpText: 'Q\tMove file to trash directory' Flags: 'WaitForTerminate ReloadFileList MoveToNext'"
;UserCmd3="KeyCode: W Cmd: 'cmd /c copy %filename% "%mypictures%\trash\%filetitle%"' Confirm: 'Really copy file to %mypictures%\trash\%filetitle%' HelpText: 'W\tCopy file to trash directory' Flags: 'WaitForTerminate'"
;UserCmd4="KeyCode: A Cmd: 'cmd /u /c echo %filename% >> "%mydocuments%\test.txt"' HelpText: 'A\tAppend to file list'"
; Open with menu commands, shown in the 'Open with..' submenu of the JPEGView context menu.
; These commands must be named OpenWith# where # stands for a number. The first open with command has the number zero (OpenWith0)
; and the numbering of the commands must be continuous.
; Open with commands must have the following form:
; OpenWith#="Cmd: '%Cmd%' Menuitem: '%menu%' [KeyCode: %Key%] [Confirm: '%confirm%'] [Flags: '%flags%']"
; For an explanation of the different options, refer to the user command documentation above.
; Notice: Open with commands should be added to the user INI file, not to this global INI file
; Example for a menu entry that opens the current image in MS Paint:
;OpenWith0="Cmd: 'C:\WINDOWS\system32\mspaint.exe %filename%' Menuitem: 'Microsoft Paint' Flags: 'ShellExecute'"