0PE_NBv1.5.1(2014-04-05)测试

gjp0975 · 发表于 2017-2-19 21:17:11

是使用你个性签名中的最新的1.5.3

longfei · 发表于 2017-2-20 10:22:31

P大尽量还是加上Linux吧，也不在乎那么几十M空间了，有时候还是需要Linux来杀一下U盘病毒的。

pseudo · 发表于 2017-2-21 19:46:14

gjp0975 发表于 2017-2-19 21:17
是使用你个性签名中的最新的1.5.3

在这个帖子：http://bbs.wuyou.net/forum.php?m ... &extra=page%3D1
里，2011mtw35大也在其它PE遇到类似问题：
刚发现一个问题，无法关机，点击“关机”会自动“重启”，这个是最新pecmd.exe做成的（内核PECMD是最新的版本），需要更换一个旧版才可以解决，下载后解压内核更换即可。
看来这与pecmd版本有关。

原因虽然找到了，但还纠结：旧版pecmd在支持映射ud区、创建imdisk虚拟盘和挂载wim方面有问题。

权衡利弊，建议PE里关机就直接关电源算啦。

gjp0975 · 发表于 2017-2-22 08:29:46

pseudo 发表于 2017-2-21 19:46
在这个帖子：http://bbs.wuyou.net/forum.php?mod=viewthread&tid=386116&extra=page%3D1
里，2011mtw35 ...

谢谢P大的回复，那我知道了，有利有弊，好的，我选择在PE里面直接关闭电源

maanu · 发表于 2017-2-24 04:41:04

本帖最后由 maanu 于 2017-2-24 05:55 编辑

pseudo 发表于 2017-2-21 19:46
在这个帖子：http://bbs.wuyou.net/forum.php?m ... &extra=page%3D1
里，2011mtw35 ...

hi

what is the password of

http://pan.baidu.com/s/1pK7lBB1

0PE NB 1.5.2 ?

i cant open baidu link in Pakistan, have to use chinese proxy to open , but it ask for password.

also can you please tell me if there is any method in chinese forums for install of windows 7/8/10 directly from ISO using USB ?

i know easy2boot can , but i need to use a simple one , like with RUN , i know xp/2003 direct iso install is supported using firadisk. same is with 0PE , but is WIN7 direct iso install also supported by any tool ?

pseudo · 发表于 2017-2-24 16:02:57

hi, long time no see.

login to the forum to see my signature. all in the links provided by my signature.

there is a menu item in the 0pe that can be used to install win7 from /ISOs/*.iso, using the RUN encapsulated in SISO.
during installation, press shift+F10 and do some operations to mount ISO in protected mode, and then continue.

maanu · 发表于 2017-2-24 17:47:38

pseudo 发表于 2017-2-24 16:02
hi, long time no see.

login to the forum to see my signature. all in the links provided by my sig ...

hi ,

thank you . yes i was busy with family and job . i am married now with 2 kids. hehehe , i hope you and family are OK .

i still dont know what is the password , is it mentioned in your signature ? i can find only attached zip file 0PE_NB 1.5.2 , but no password , can you share it anywhere else like google drive or anything ?

i was checking my old files , and found this solution that i copied from here or somewhere else.

please see here

https://drive.google.com/open?id=0B18z9DlyIarsWnNOODVSZFU2WkU

this way , you dont have to press SHIFT F10 , it is all automatic windows 7 iso install using IMDISK.

Best Regards
Maanu from Pakistan

pseudo · 发表于 2017-2-24 18:35:11

Thank you for your information.

0PE_NBv1.5.2.txt says
link: http://pan.baidu.com/s/1pK7lBB1 password:z7rm

unfortunately, I can not visit the foreign website

ksafei · 发表于 2017-2-24 20:01:23

pseudo 发表于 2017-2-24 18:35
Thank you for your information.

0PE_NBv1.5.2.txt says

3054楼下载文件，请参阅

win7.zip (837.93 KB, 下载次数: 7)

maanu · 发表于 2017-2-25 05:27:25

pseudo 发表于 2017-2-24 18:35
Thank you for your information.

0PE_NBv1.5.2.txt says

thank you , downloading now.

ksafei , thank you for providing mirror.

pseudo · 发表于 2017-2-25 10:26:57

本帖最后由 pseudo 于 2017-2-25 10:40 编辑

@ksafei
thank you
@maanu
It seems that it automatically calls the loadiso.cmd in AutoUnattend.xml, without manually pressing shift+f10 and running the cmd. That's more automated.
Maybe the current version of RUN/SISO doesn't have to press shift+f10, I haven't actually tried it yet.

邪恶海盗 · 发表于 2017-3-1 13:04:36

pseudo 发表于 2017-1-26 21:10
不好意思，过年回家这几天没上机，现在才看到。
谢谢不点大人详细介绍。
1、类似

10PE里用FeiQ2.4不正常是什么情况,我在正常的10X32下运行后看了下调用的文件,把缺的补到10PEx64里去发现还是不正常,请测试...

maanu · 发表于 2017-3-1 15:35:26

本帖最后由 maanu 于 2017-3-1 16:57 编辑

pseudo 发表于 2017-2-25 10:26
@ksafei
thank you
@maanu

hi ,

yes , exactly it does this . it is automated . just like your method of installing windows xp/2003.

i have one question .

i am making a USB for my friend to install windows 7/8/10 from ISO directly , i have make 2 partitions. 1 is FAT32 2GB which is hidden with all boot files, and remaining 28 GB for DATA partition NTFS , which is visible in windows. i made it using BOOTICE .

windows 7 iso , IMDISK , autoUnattend.xml files are at root of NTFS partition . but when i try to install windows 7 via ISO from USB , installation always failed , with error

a required CD/DVD driver was not found .

it seems windows is not seeing usb partition and only reading FAT32 partition . is there any command in grub4dos or in RUN to swap the partition during boot so that windows can read ?

also , can you please just upload base structure of your 0PE without any win7,WIN10PE ? i can not download 2GB full package. i just want to study new improvements in your structure.

edit :

i just found out , after booting win7 install setup , i pressed shift + F10 , loaded DISKPART , LIST DISK , does not found any USB attached , while usb was attached in my USB 2.0 port , my lenovo flex4 laptop has 3 ports , 2 usb3.0 and 1 usb2.0 . any reason why usb was not recognized ?
Thank you

Regards
Maanu

pseudo · 发表于 2017-3-1 16:59:35

@Maanu
You can press shift+F10 to check if the ISO is mounted as CD/DVD with imdisk.

Another file named 0PE_NBv1.5.3(20161224)2in1+10pe(20161228).7z is provided at the same link mentioned above, which is only 393MB.

pseudo · 发表于 2017-3-1 17:12:21

邪恶海盗发表于 2017-3-1 13:04
10PE里用FeiQ2.4不正常是什么情况,我在正常的10X32下运行后看了下调用的文件,把缺的补到10PEx64里去发现 ...

印象中这个软件是从坛里收集的，后来发布者人品被质疑。
软件可能有后门，建议删除。
用qq吧。

邪恶海盗 · 发表于 2017-3-1 18:53:06

本帖最后由邪恶海盗于 2017-3-1 18:55 编辑

pseudo 发表于 2017-3-1 17:12
印象中这个软件是从坛里收集的，后来发布者人品被质疑。
软件可能有后门，建议删除。
用qq吧。

没有啊,我从官网下载的,feiq18.com,好像被黑了,不是那个盗版的飞鸽...

FeiQ2.4.7z (1.11 MB, 下载次数: 2)

maanu · 发表于 2017-3-2 05:13:09

pseudo 发表于 2017-3-1 16:59
@Maanu
You can press shift+F10 to check if the ISO is mounted as CD/DVD with imdisk.

hi , i tried on my old laptop and my same setup worked . it was error due to win7 does not have usb drivers for latest lenovo laptop.

i am sorry , i can not use baidu , due to it asks for registration , and i dont have chinese mobile , so cant register.

it ll be great if you or someone else can provide me . if you interested , i can give you my seedbox login details , you can upload there using ftp or browser.

邪恶海盗 · 发表于 2017-3-2 13:23:08

maanu 发表于 2017-3-2 05:13
hi , i tried on my old laptop and my same setup worked . it was error due to win7 does not have us ...

You can use USB 2.0 port,and install usb 3.0 driver

maanu · 发表于 2017-3-3 03:01:03

邪恶海盗发表于 2017-3-2 13:23
You can use USB 2.0 port,and install usb 3.0 driver

hi ,

is there any universal USB 3.0 driver for windows ? or is it attached to specific chipset ?

by the way, my laptop's USB 2.0 port also dont work , but it works with windows 7 sp1 boot files.

邪恶海盗 · 发表于 2017-3-3 08:23:15

maanu 发表于 2017-3-3 03:01
hi ,

is there any universal USB 3.0 driver for windows ? or is it attached to specific chipset ...

I think your OS was installed wrong USB drivers to your computer ,so USB port don't work.
Dose it worked in WinPE?
If it worked,you can install usb drivers for OS in WinPE.

maanu · 发表于 2017-3-3 16:30:05

邪恶海盗发表于 2017-3-3 08:23
I think your OS was installed wrong USB drivers to your computer ,so USB port don't work.
Dose it ...

i think there is no need , my lenovo flex 4 has 2 usb3.0 ports and 1 usb 2.0 port . and in WIN7PE all 3 ports work.

it was just for testing purpose.

thank you.

邪恶海盗 · 发表于 2017-3-3 21:30:07

本帖最后由邪恶海盗于 2017-3-3 21:34 编辑

maanu 发表于 2017-3-3 16:30
i think there is no need , my lenovo flex 4 has 2 usb3.0 ports and 1 usb 2.0 port . and in WIN7PE ...

Good,If they are worked in WinPE,that means them aren't broken,I think you can use a tool named MSX_CEO,it was a chinese language software,it was a tool to install USB and XHCI drivers to your os in WinPE,give me your Email,I send it for you and teach you how to use it.

sorry to my bad english,hope you can known what i say.

maanu · 发表于 2017-3-4 03:00:48

hi , i ll pm you my email .

i have been using chinese forums since the time of znpc forums , where bean shared FBINST first time , back in 2008/2009 . so chinese is no issue for me , with help of google translate .

邪恶海盗 · 发表于 2017-3-4 08:52:16

maanu 发表于 2017-3-4 03:00
hi , i ll pm you my email .

i have been using chinese forums since the time of znpc forums , whe ...

I send the software to you

and you are so niubility...

Do you know what it i mean?

邪恶海盗 · 发表于 2017-3-4 09:03:36

maanu 发表于 2017-3-4 03:00
hi , i ll pm you my email .

i have been using chinese forums since the time of znpc forums , whe ...

sorry my email could't send big file to you,i update it in my website on a hk server,and send the download link to you

longfei · 发表于 2017-3-8 17:01:37

longfei 发表于 2017-2-20 10:22
P大尽量还是加上Linux吧，也不在乎那么几十M空间了，有时候还是需要Linux来杀一下U盘病毒的。

谢谢P大回复，我找个旧版加入吧，谢谢。

yhhxlp · 发表于 2017-3-14 11:14:26

本帖最后由 yhhxlp 于 2017-3-14 11:22 编辑

ope 全分散开或把iso和petools散开用fb1.6版本正常用fb1.7 版本的不能出现petools菜单，不知道是什么问题
是不是0pe内置的fb版本是1.6的
把petools打包到iso中在1.6版本下和1.7版本下都能正常出现petools菜单

把petools和imgs分散出来主要是更新里面的工具方便一些

pseudo · 发表于 2017-3-14 14:20:20

1、fbinst.exe(实为fbinst plus改名)在pe.wim内，自己可以更新（勿使体积大变）。
pe.wim解压：7-zip；pe.wim打包：在0pe里右键可将某文件夹制作成wim。
最好先用UPX_Tool.exe压缩fbinst.exe。
2、fbinsttool也许要用1.7版才跟fbinst、fbinst plus新版配套。
3、iso里原petools也可以不动，另在ud自己弄petools文件夹放单文件绿软（外面弄好拖入ud即可），进桌面后点开始菜单的petools快捷方式就好了。

2011LLYC · 发表于 2017-3-15 19:01:15

重新下载

2012eye · 发表于 2017-3-27 11:23:53

谢谢谢谢谢谢辛苦了

		自动登录	找回密码
密码			注册

0PE_NBv1.5.1(2014-04-05)测试

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

浏览过的版块