在线等，请教这该怎么做！

wjgyz740526

我想做一张启动光盘，把无忧启动作进去，用easyboot做好菜单并把菜单执行命令 run dos98.img,我已在dos98.img 里把autuexec.bat修改了添加了文件查找路径path=%RAMD%:\;a:\;%CDROM%:\ezboot\boot\edb\然后在最后添加了无忧启动的菜单批处理命令menu.bat但是这样没用，提示bad common or file name,请问各位高手该怎么做？我的E-mail:wjgyz740526@msn.com

dsyang

用命令run XXX.ezb来执行子菜单命令启动无忧启动

wjgyz740526

请教一下，如果要把无忧作进去，easyboot的目录如下:
easyboot___disk1___easyboot___boot___edb___menu.bat
        !                  !___ucdos
        !
        !___iso
我在dos启动镜像中把autorun.bat添加了文件查找路径和要执行的命令menu.bat,做成iso后在V-PC中调用确报错，恳请帮忙，不胜感激。bat文件如下
@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=c:\
set tmp=c:\
path=%RAMD%:\;a:\;%CDROM%:\ezboot\boot\edb\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL
copy readme.txt %RAMD%:\ > NUL
:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR
:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.
IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="HELP" GOTO HELP
LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM%
echo.
GOTO QUIT
:HELP
cls
call help.bat
echo Your computer will now restart and the startup menu will appear.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
restart.com
GOTO QUIT
:QUIT
echo To get help, type HELP and press ENTER.
echo.
rem clean up environment variables
set CDROM=
set LglDrv=
cls.
menu.bat
  


请问我到底哪儿做错了呢？

dsyang

用UltraISO把无忧启动的引导提出来，在easyboot中用run命令来执行就OK啦

ylcasdfg

将"无忧启动"的命令对应SCSI98.IMG,将SCSI98.IMG拷贝到EASYBOOT\DISK1\ETBOOT下面,将无忧启动的ISO解压,把文件夹"BOOT"拷贝到EASYBOOT\DISK1下面,现在制作ISO刻录吧,包你成功

wjgyz740526

问题是我没有无忧启动盘，无法提取他的启动镜像，再说了要是我自己想用dos启动镜像添加该怎么做呢？我的autorun.bat到底哪儿不对呢？有dos的高手吗？恳请解决！