关于XP EMBEDDED休眠后快速启动的问题！

天风

把EWF打开后对系统进行保护，然后关机时选用休眠功能可以让EMBEDDED快速启动，这样非常方便，并且启动时间也只有几秒钟！
但是我测试了如果直接断电或者RESET，在启动时出现一个引导选项提示你是删除还原数据回到启动菜单还是继续启动！默认是第一个删除还原数据，如何在注册表中修改这个选项，无论什么情况下都从还原数据直接启动而不再出现提示菜单呢？
大家都来看看！

xdg3669

这新的技术没有人研究？或者太深了，可能对我们老菜来说！！

3lar

请问楼主，在制作EWF时，出现如下错误
Getting EWF config parameters from registry.

23:29:37 -  Non El Torito disk configuration.

23:29:37 -  EWF Partition Size = 0 (KBytes), Levels = 1, Volumes = 1.

23:29:37 -  Protected Volume Config #0 :

23:29:37 -    Disk= 0,Part= 1,DiskType= IDE,Type= RAM.

23:29:37 -    Enable= Enabled, Optimize= 0, LazyWrite= N.

23:29:37 -  Found 1 Hard Disks.

23:29:37 -  Disk #0 layout info:

23:29:37 -  PRIMARY partition,start=0x0000000000007e00, len=0x00000001384bfc00, type= 7

23:29:37 -  EXTENDED partition,start=0x00000001384c7a00, len=0x0000000cc0ac8600, type= 15

23:29:37 -  LOGICAL partition,start=0x00000001384c7a00, len=0x0000000271167600, type= 7

23:29:37 -  LOGICAL partition,start=0x00000003a962f000, len=0x0000000271167600, type= 7

23:29:37 -  LOGICAL partition,start=0x000000061a796600, len=0x0000000271167600, type= 7

23:29:37 -  LOGICAL partition,start=0x000000088b8fdc00, len=0x0000000271167600, type= 7

23:29:37 -  LOGICAL partition,start=0x0000000afca65200, len=0x00000002fc52ae00, type= 7

23:29:37 -  FREE partition,start=0x0000000df8f90000, len=0x00000000007d8200, type= 0

23:29:37 -  Can';t create EWF partition size = 0x000000000000fc00 on disk# 0.

23:29:37 -  Failed to create EWF partition.

23:29:37 -  ConfigureEwf() End, status = 0x80070057.
不能创建EWF分区，该怎么办？

3lar

楼主做的是RAM的吗？怎么找不到Background Disk Defragmentation Disable 这个组件啊，我的是SP1的

lian228

我的也找不到这个组件,ewf我成功了,1,Enable= Enabled,我没打对勾,没开,2,我在扩展分区,留出一些空间,没做逻辑分区

天风

Microsoft Windows XP Embedded   

Enabling a Hibernate Once/Resume Many Environment with EWF
After you have added support for EWF and hibernation to your run-time image, verify that EWF is working and enable hibernation.

To enabling a hibernate once/resume many environment with EWF

In your run-time image, disable EWF by using ewfmgr. For example:
ewfmgr c: -disable
Restart your system. After you reboot the system, EWF will be disabled.
Verify that the hibernation file, hiberfil.sys, exists on the system. For example, use the dir command:
dir /Ahs c:\hiberfil.sys
Create the file resmany.dat. This file should be empty. For example:
notepad resmany.dat
The resmany.dat file is used to notify NTLDR to boot from the hibernation file. Typically, NTLDR changes the signature of the hibernation file when it is first booted. On a standard Windows XP Professional system, it is expected that the state of the system will change and the hibernation file will be overwritten with new data on shutdown. However in a hibernate once, resume many environment, a single hibernation file is used to boot the system repeatedly. Because NTLDR changes the signature of the hibernation file during boot, NTLDR interprets this signature change as a failed attempt to boot from the file. However, if the resmany.dat file exists, NTLDR boots from the hibernation file normally.

Enable EWF by using ewfmgr. For example:
ewfmgr c: -enable
Restart the system. After you reboot the system, EWF is enabled.
Open applications and start any processes that you want to be running on the system when it resumes from hibernation.
Use the XP Embedded Power manager utility to cause the system to hibernate.
xpepm -hibernate
Reboot the system. The system boots from the hibernation file. All of the applications and processes that were opened are running and EWF is protecting the volume

所需要的电源管理文件

xdg3669

新版用了，顺手把这顶上一顶！引起大家的注意。。。。^_^

cimit13

XP EMBEDDED系统顶上一顶！

cfgs

希望能看到最新成果。

lei7815034

俺 的和楼主一样，不过我的无线键盘也不能用，非在设备管理器里把那个无线设备停用然后再启用这样才能用，也不知道有没有解决的办法

xujiebegin

希望早日成功，一起努力！

cqulzg

现在在xpe上实现了这个功能
但是在ewf打开的情况下，对磁盘上任何文件操作都会重定位到ram上
这样很快ram就占满了
整个系统慢得很
不知道有没有什么好的解决方法