GHOST镜像文件有密码，如何破解？

凤凰

我的东芝笔记本带有一张恢复盘，是GHOST做的，但是影象文件有密码，而恢复的时候却不需要任何密码…… 怎么能破解出这个密码？？
光盘自动启动，自动恢复的，我把几个批处理文件内容放上，请帮忙看看：
软盘镜像文件内
autoexec.bat的内容：
@ECHO OFF
PATH=A:\TOOLS;A:\DOS
REM manufacture check "TOSHIBA"
TOSCHK > NUL
IF ERRORLEVEL 1 OFF
REM set temporary drive
SET TEMP=I:
VOLCHECK I: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=H:
VOLCHECK H MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=G:
VOLCHECK G: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=F:
VOLCHECK F: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=E:
VOLCHECK E: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=D:
VOLCHECK D: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
SET TEMP=C:
VOLCHECK C: MS-RAMDRIVE > NUL
IF NOT ERRORLEVEL 1 GOTO DV
GOTO ERROR
:DV
F2D A:\BMP.IMG %TEMP% > NUL
F2D A:\TOOLS.IMG %TEMP% /D > NUL
PATH=%TEMP%\TOOLS;%TEMP%\DOS;A:\DOS;A:\TOOLS
IF NOT EXIST A:\README.BMP GOTO CD
BMPVIEW A:\README.BMP
PAUSE > NUL
:CD
MSCDEX /D:MSCD001 /L:T >NUL
IF ERRORLEVEL 1 GOTO NO_CDDRV
REM get temporary status
MBR /G1 >NUL
IF ERRORLEVEL 3 GOTO MENU
IF ERRORLEVEL 1 GOTO 2ND
:MENU
IF NOT EXIST A:\BASE.TXT GOTO NORMAL
IF NOT EXIST %TEMP%\BMP\SELECT.BMP GOTO NORMAL
REM OS select
BMPVIEW %TEMP%\BMP\SELECT.BMP /X=140 /Y=160
REM Clear keybuffer
CLK
CHOICE /C:12 > NUL
IF ERRORLEVEL 2 GOTO BASEOS
REM Push '1' button
BMPVIEW /XC %TEMP%\BMP\BTN1.BMP /X=198 /Y=221
MBR /S2:00 >NUL
GOTO WARNNING
:BASEOS
REM Push '2' button
BMPVIEW /XC %TEMP%\BMP\BTN2.BMP /X=198 /Y=238
MBR /S2:01 >NUL
GOTO WARNNING
:NORMAL
REM no OS select
MBR /S2:00 >NUL
BMPVIEW %TEMP%\BMP\RECOVERY.BMP /X=140 /Y=160
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO CDERREND
BMPVIEW /XC %TEMP%\BMP\Y2.BMP /X=340 /Y=288
GOTO WARNNING
:WARNNING
REM warnning
SET GOPT=-QUIET
BMPVIEW %TEMP%\BMP\MES002.BMP /X=140 /Y=160
CLK
CHOICE /C:YNS> NUL
IF ERRORLEVEL 3 GOTO STATYES
IF ERRORLEVEL 2 GOTO CDERREND
GOTO YES
:STATYES
SET GOPT=
:YES
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288
REM set temporary status (first boot)
MBR /S1:01 >NUL
:2ND
REM check boot devie
REM  0:FD 1:CD-ROM
CDCKBOOT > NUL
REM if errorlevel 1 then set boot priority "FD"=0 (Default)
IF ERRORLEVEL 1 SETBOOT 0 >NUL
REM Partition check
REM  11: HDD has already formatted. (FAT32)
REM  10: HDD has not been formatted. (FAT32)
REM   7: HDD has already formatted. (FAT16)
REM   6: HDD has not been formatted. (FAT16)
REM   3: HDD has already formatted. (Invalid FAT)
REM   1: HDD has not been formatted. (Invalid FAT)
REM   0: No partition exists.
MBR /P >NUL
IF ERRORLEVEL 11 GOTO FORMAT
IF ERRORLEVEL 10 GOTO FORMAT
IF ERRORLEVEL  7 GOTO FORMAT
IF ERRORLEVEL  6 GOTO FORMAT
IF ERRORLEVEL  1 GOTO FORMAT
GOTO FDISK
:CLEAR
REM clear partition
BMPVIEW %TEMP%\BMP\CLEAR.BMP
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO CDERREND
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288
BMPVIEW %TEMP%\BMP\MES002.BMP /X=140 /Y=160
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO CDERREND
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288
MBR /! > NUL
MBR /C1 > NUL
CDCKBOOT > NUL
IF ERRORLEVEL 1 SETBOOT 4 >NUL
HARDBOOT
:FDISK
REM create FAT32 partition (Max64GB)
CLS
ECHO.
ECHO Create FAT32 partition ...
FDISK 1 /PRI:65535
IF ERRORLEVEL 1 GOTO FDISKERR
REM check boot devie
REM  0:FD 1:CD-ROM
CDCKBOOT > NUL
REM if errorlevel 1 then set boot priority "CD-ROM"=4
IF ERRORLEVEL 1 SETBOOT 4 >NUL
REM reboot
HARDBOOT
:FORMAT
CLS
REM --- FORMAT C: %FMTOPT% /U /V:"" /AUTOTEST
REM Clear temporary status
MBR /C1 >NUL
GOTO GO
:NO_CDDRV
REM CD-ROM Drive not found
BMPVIEW %TEMP%\BMP\NO_CDDRV.BMP
PAUSE > NUL
GOTO END
:FDISKERR
ECHO FDISK ERROR!
PAUSE > NUL
GOTO END
:CDERREND
REM Push 'N' button
BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=412 /Y=288
GOTO END
:END
OFF
:ERROR
ECHO RAMDIRVE NOT FOUND!
PAUSE > NUL
GOTO END
:GO
IF EXIST %TEMP%\BMP\WAIT.BMP BMPVIEW %TEMP%\BMP\WAIT.BMP
IF NOT EXIST %TEMP%\BMP\WAIT.BMP ECHO COPYING...
MICOPY A:\TOOLS %TEMP%\TOOLS > NUL
MICOPY A:\DOS %TEMP%\DOS > NUL
COPY COMMAND.COM %TEMP%\ > NUL
COPY RUN.BAT %TEMP%\ > NUL
%TEMP%
CD \
SET COMSPEC=%TEMP%\COMMAND.COM
SET BASECD=
PATH=%TEMP%\TOOLS;%TEMP%\DOS
RUN.BAT
run.bat的内容：
@ECHO OFF
PATH=%TEMP%\TOOLS;%TEMP%\DOS
:CHECKCD
REM Check CD-ROM Drive
REM  0:Ready 1:NotReady 2:NotCD-ROMdrive 3:IllegalDrive
CDCHECK T: > NUL
CDCHECK T: > NUL
IF ERRORLEVEL 2 GOTO NO_CDDRV
IF ERRORLEVEL 1 GOTO SET_CDROM
SET CDDRV=T:
GOTO CD_EXIST
:SET_CDROM
REM Insert CD-ROM
BMPVIEW %TEMP%\BMP\SETCDROM.BMP
PAUSE > NUL
:CHECKCD2
REM Check CD-ROM Drive
CDCHECK T: > NUL
CDCHECK T: > NUL
IF ERRORLEVEL 2 GOTO NO_CDDRV
IF ERRORLEVEL 1 GOTO NOCDROM
SET CDDRV=T:
GOTO CD_EXIST
:CD_EXIST
REM Check Recovery CD-ROM
IF NOT EXIST %CDDRV%\PREINST.GHO GOTO BAD_CDROM
IF NOT EXIST %CDDRV%\GHOST.EXE GOTO BAD_CDROM
IF NOT EXIST %TEMP%\TOOLS\GHOST.EXE COPY %CDDRV%\GHOST.EXE %TEMP%\TOOLS > NUL
:RECOVERY
IF NOT EXIST %CDDRV%\PREDATA.BAT GOTO BAD_CDROM
IF (%COMPMODE%) == () CALL %CDDRV%\PREDATA.BAT
IF NOT EXIST %TEMP%\BMP\CHANGE.BMP GOTO SKIP
IF (%CDMAX%) == (1) GOTO SKIP
BMPVIEW %TEMP%\BMP\CHANGE.BMP
PAUSE > NUL
:SKIP
SET TGHOSTPS=%FILENAME%
IF (%COMPMODE%) == (PARTITION) TGHOST -clone,mode=pload,src=%CDDRV%\PREINST.GHO:1,dst=1:1 -afile=%TEMP%\PREINST.ERR -fatlimit -auto -sure -batch %GOPT%
IF (%COMPMODE%) == (DRIVE)     TGHOST -clone,mode=load,src=%CDDRV%\PREINST.GHO,dst=1,szeE -afile=%TEMP%\PREINST.ERR -fatlimit -auto -sure -batch %GOPT%
IF ERRORLEVEL 1 GOTO REC_NG
LBA /C > NUL
FDISK /MBR > NUL
:NORMAL
REM Recovery success
BMPVIEW %TEMP%\BMP\THEEND.BMP
:LOOP
PAUSE > NUL
HARDBOOT
GOTO LOOP
REM ================= ERROR ===============================
:BAD_CDROM
REM Bad CD-ROM
BMPVIEW %TEMP%\BMP\BADCDROM.BMP /X=140 /Y=160
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO CDERREND
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288
GOTO SET_CDROM
:NOCDROM
REM CD-ROM not found
BMPVIEW %TEMP%\BMP\NOCDROM.BMP /X=140 /Y=160
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO CDERREND
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288
GOTO SET_CDROM
:NO_CDDRV
REM CD-ROM Drive not found
BMPVIEW %TEMP%\BMP\NO_CDDRV.BMP
PAUSE > NUL
GOTO END
:REC_NG
REM Recovery error
BMPVIEW %TEMP%\BMP\RECOVERR.BMP /X=96 /Y=168
CLK
CHOICE > NUL
IF ERRORLEVEL 2 GOTO R_ERREND
REM Push 'Y' button
BMPVIEW %TEMP%\BMP\Y3.BMP /XC /X=392 /Y=272
REM Restart
BMPVIEW %TEMP%\BMP\REBOOT2.BMP
PAUSE > NUL
REM check boot devie
REM  0:FD 1:CD-ROM
CDCKBOOT > NUL
REM if errorlevel 1 then set boot priority "CD-ROM"=4
IF ERRORLEVEL 1 SETBOOT 4 >NUL
REM reboot
HARDBOOT
:R_ERREND
REM Push 'N' button
BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=464 /Y=272
GOTO END
:CDERREND
REM Push 'N' button
BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=412 /Y=288
GOTO END
:END
OFF
光盘内predata.bat的内容：
@ECHO OFF
REM --- Version 3.0(603) ---
SET SWN=S3A0739D
SET EXT=001
SET VOLLABEL=%SWN%%EXT%
SET FILENAME=%SWN%.%EXT%
SET COUNTRY=CHINA
SET INSTMODE=SING
SET COMPMODE=PARTITION
SET OSTYPE=ME
SET PASSMODE=YES
SET CDMAX=1
SET CDNUM=1

wuyou

其实你不需要什么密码，把原有的恢复到硬盘上，再用GHOST克隆出来，不就可以了吗！
你提供的这个批命令这么长，并且有一些是自带的工具，分析起来很麻烦啊！

faefb3

A50的Ghost密码是4位字符，因为商业秘密，只能告诉这么多了。

fiendwolf

也是啊,自己做个GHOST不比破解密码简单?

gamerenzz

长见识了

弄潮儿-NET

把镜像传上来，我帮你解……（有效期至2007年2月28号）过期恕不理人……

rtyu11

学习了。。。。。。。。。

it2000

密码包含在tools\tghost.exe里面,这个文件应该是个批处理被转换而成的.

xsjlai88

自己再ghost一次，就可以了嘛

liujh01

看来GHOST的密码还真是不好搞,我有一台服务器做的时候 设了个密码,现在也不记的了
很欲梦的

hancy_wong

弄潮儿-NET ,请一定帮忙解一下GHOST密码，谢谢！怎么发给你？

chishingchan

上面的批处理好像说明密码就是文件名称,不知是不是?

jiangfeng321

恢复到机器上以后再把他作成GHO文件就好了嘛  何必如此麻烦

ksdb123

好象是没有很好的解GHOST密码的方法啊

q8q8feng

:L 看了都晕 还别说分析了

lanjianfei

就是啊,自己重新ghost一下,几分钟就解决了.

wkl_3369

长见识,多谢

yaojif

忘了密码怎么GHOST啊，哈哈！

os2kxp

学习学习,长见识了......

jtfzp

楼主给出的信息已经能够算出密码啦。需要东芝GHO密码的请联系我。QQ：292925400

yjd

ghost密码能解？