请教，我一连烧录失败13只CD了。

yanngoyan

每次都是在烧录了2%时失败的，现贴上烧录报告，请高手帮忙分析并给我指导，感激不尽！
Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 22/09/2002 10:07:44 AM
Nero Version: 5.5.9.9 (Nero Express)
Recorder: <HP CD-Writer+ 7200> Version: 3.01 - HA 2 TA 1 - 5.5.9.9
Adapter driver: <atapi> HA 2
Drive buffer : 768kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <V386 STEALTH DVD> Version: 1.0h - HA 0 TA 0 - 5.5.9.9
Adapter driver: <Stealth> HA 0
Bus Type : default (0) -> SCSI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : V386 STEALTH DVD 1.0h Stealth Port 0 ID 0 DMA: ?
DiskPeripheral : ST330621A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP CD-Writer+ 7200 atapi Port 2 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130544kB)
Free physical memory: 21MB (21812kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
22.9.2002
CD-ROM (ISO)
10:23:22 AM #1 Text 0 File Isodoc.cpp, Line 6003
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:23:22 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
10:23:22 AM #3 Text 0 File Writer.cpp, Line 134
Writer HP CD-Writer+ 7200 running
10:23:22 AM #4 ISO9660GEN -11 File geniso.cpp, Line 4488
First writeable address = 0 (0x00000000)
10:23:23 AM #5 Text 0 File Burncd.cpp, Line 3542
Turn on Track-At-Once, using CD-R/RW media
10:23:23 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 242416 (242416) = #242416/53:52.16
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
10:23:27 AM #7 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 242415 (53:54.15)
10:23:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 204
Write in overburning mode: FALSE
10:23:28 AM #9 Text 0 File DlgWaitCD.cpp, Line 1403
Recorder: HP CD-Writer+ 7200;
CDRW code: 00 97 27 27; OSJ entry from: Princo Corporation
ATIP Data: ?
10:23:29 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 815
Prepare recorder HP CD-Writer+ 7200 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 496775168
10:23:29 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 843
Removed 2 run-out blocks from end of track 1.
10:23:29 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 242416 (242416) = #242416/53:52.16
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 242414 blocks [HP CD-Writer+ 7200 ]
--------------------------------------------------------------
10:23:30 AM #13 Phase 24 File dlgbrnst.cpp, Line 1566
Caching of files started
10:23:30 AM #14 Phase 25 File dlgbrnst.cpp, Line 1566
Caching of files completed
10:23:30 AM #15 Phase 36 File dlgbrnst.cpp, Line 1566
Burn process started at 2x (300 KB/s)
10:23:32 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1947
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
10:24:02 AM #17 SCSI -1015 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x027B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x19
0x00 0x00 0x0D 0xC2 0x73 0x02
10:24:02 AM #18 MMC -1015 File Writer.cpp, Line 335
Calibration area full
10:24:02 AM #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
10:24:02 AM #20 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
10:24:06 AM #21 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state
10:24:06 AM #22 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack
10:24:06 AM #23 SCSI -1023 File Cdrdrv.cpp, Line 1211
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x19
0x00 0xFF 0xFF 0xD3 0x2C 0x00
10:24:06 AM #24 MMC -1023 File WriterStatus.cpp, Line 227
Command sequence error
10:24:06 AM #25 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation
10:24:06 AM #26 Text 0 File WriterStatus.cpp, Line 236
falling back to disc fixation
10:24:06 AM #27 SCSI -1023 File Cdrdrv.cpp, Line 1211
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x19
0x00 0xFF 0xFF 0xB6 0x2C 0x00
10:24:06 AM #28 MMC -1023 File WriterStatus.cpp, Line 227
Command sequence error
10:24:06 AM #29 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation
10:24:07 AM #30 Phase 38 File dlgbrnst.cpp, Line 1566
Burn process failed at 2x (300 KB/s)
10:24:07 AM #31 Text 0 File Scsicmd.cpp, Line 395
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 02/03/2001 8:55:54 PM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 02/03/2001 8:55:54 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.5376, size=86704 bytes, created 22/07/2002 12:05:04 PM (Adapter driver for rec)
File 'Drivers\stealth.sys': Ver=3.11.0.0, size=77920 bytes, created 13/05/2002 10:14:38 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

hugh

10:23:30 AM #13 Phase 24 File dlgbrnst.cpp, Line 1566
Caching of files started
应该涉及到软件本身的异常处理问题了，建议你只模拟而不刻录试一下，如果再有问题，装一下easycd creator等别的软件试试，如果还是不行，那可能和硬件有关系了

hnlydbyh

应该是软件的问题，楼上的说的有道理。