20190817:RyanTC—16MB的微型移動Linux系統建pxe伺服器II。「再」公開原始碼

hkkitlee

在測試及運作了一段時間後。看來所需的功能一切穩定運作順利。
在論壇「再」公開是為著有興趣的朋友方便研究。
確切在TC內執行的bash腳本是在/.ryantc內的。


sudo /usr/bin/nohup sudo /bin/sh /.ryantc/.aTCbash.sh;


sudo /bin/rm nohup.out

hkkitlee

.aTCbash.sh

sudo /usr/bin/nohup sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/.bTCpxe.sh -O /.ryantc/.bTCpxe.sh;sudo /usr/bin/nohup sudo /bin/sh /.ryantc/.bTCpxe.sh;
sudo /usr/bin/nohup sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/.cTCsmb.sh -O /.ryantc/.cTCsmb.sh;sudo /usr/bin/nohup sudo /bin/sh /.ryantc/.cTCsmb.sh;
sudo /usr/bin/nohup sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/.dTCsshfs.sh -O /.ryantc/.dTCsshfs.sh;sudo /usr/bin/nohup sudo /bin/sh /.ryantc/.dTCsshfs.sh;

cat << EOF >> /home/tc/help
cat /proc/partitions | less
EOF

hkkitlee

.bTCpxe.sh

/bin/su tc -c '/usr/bin/tce-load -wi dnsmasq';


sudo /bin/cat << EOF > /etc/dnsmasq.conf

#Don't function as a DNS server:
port=0

#Log lots of extra information about DHCP transactions.
log-dhcp

enable-tftp
tftp-root=/var/lib/tftpboot

#Disable re-use of the DHCP servername and filename fields as extra
#option space. That's to avoid confusing some old or broken DHCP clients.
dhcp-no-override

pxe-prompt="Press F8 for NBP (Net Boot Program) menu.", 10

#0
pxe-service=X86PC, "kkpxe for Legacy BIOS", undionly.kkpxe
pxe-service=X86PC, "kpxe for Legacy BIOS", undionly.kpxe
pxe-service=X86PC, "pxe for Legacy BIOS", undionly.pxe
pxe-service=X86PC, "Test for Legacy BIOS", test.bios

#2
pxe-service=IA64_EFI, "Boot IA64_EFI", uefi/ipxe64.efi
pxe-service=IA64_EFI, "Test IA64_EFI", uefi/test64.efi

#6
pxe-service=IA32_EFI, "Boot IA32_EFI", uefi/ipxe32.efi
pxe-service=IA32_EFI, "Test IA32_EFI", uefi/test32.efi

#7
pxe-service=X86-64_EFI, "Boot X86-64_EFI", uefi/ipxe64.efi
pxe-service=X86-64_EFI, "Test X86-64_EFI", uefi/test64.efi

#8
pxe-service=Xscale_EFI, "Boot BC_EFI", uefi/ipxe64.efi
pxe-service=Xscale_EFI, "Test BC_EFI", uefi/test64.efi

#9
pxe-service=BC_EFI, "Boot BC_EFI", uefi/ipxe64.efi
pxe-service=BC_EFI, "Test BC_EFI", uefi/test64.efi

EOF

ip=$(/sbin/ifconfig |grep -v 127 | grep 'inet ' | sed 's/^.*inet addr://g'    | sed 's/ *Bcast.*$//g')

echo "dhcp-range=$ip,proxy" >> /etc/dnsmasq.conf



sudo /bin/mkdir -p /var/lib/tftpboot/uefi

/usr/local/sbin/dnsmasq -9 &

sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/undionly.pxe -O /var/lib/tftpboot/undionly.pxe ;
sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/undionly.kpxe -O /var/lib/tftpboot/undionly.kpxe ;
sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/undionly.kkpxe -O /var/lib/tftpboot/undionly.kkpxe ;
sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/ipxe32.efi -O /var/lib/tftpboot/uefi/ipxe32.efi ;
sudo /usr/bin/wget https://hkkitlee.ddns.net:9000/ipxe64.efi -O /var/lib/tftpboot/uefi/ipxe64.efi ;

hkkitlee

.cTCsmb.sh

/bin/su tc -c '/usr/bin/tce-load -wi samba'
sudo /bin/cat << EOF > /usr/local/etc/samba/smb.conf
[global]
workgroup = WORKGROUP
netbios name = ryantc
#map to guest = Bad Password
usershare allow guests = yes
server min protocol = SMB2_10
client min protocol = SMB2
client max protocol = SMB3


[Media]
comment = share
path = /samba
writable = yes
public = yes
#guest ok = yes
#guest only = yes
browseable = yes
available = yes
create mask = 2777
force create mode = 0666
force directory mode = 2777
read only = No

[Pxe]
comment = tftpboot
path = /var/lib/tftpboot
writable = yes
public = yes
#guest ok = yes
#guest only = yes
browseable = yes
available = yes
create mask = 2777
force create mode = 0666
force directory mode = 2777
read only = No

EOF

sudo /bin/mkdir -p /var/lib/samba/private
/usr/bin/sudo /usr/local/etc/init.d/samba restart &


cat << EOF >> /home/tc/help
windows command: net use z: \\ryantc\media /user:root root
EOF

hkkitlee

.dTCsshfs.sh

/bin/su tc -c '/usr/bin/tce-load -wi sshfs-fuse.tcz'

cat << EOF >> /home/tc/help
sshfs tc@xxx.xxx.xxx.xxx:/folder /mnt -p xxxxx
EOF

心零

菜鸟路过，教程不友好。

2012FuckTheCPC

thanks for sharing!

♂竇豆♂

有SERVER 2016的搭建方法么

江南一根葱

你用的是哪个镜像源，我好像tce-load -wi samba不行，只能tce-load -wi samba3

hkkitlee

♂竇豆♂ 发表于 2019-8-16 13:01
有SERVER 2016的搭建方法么

沒有，我不用windows server

hkkitlee

江南一根葱 发表于 2019-8-16 19:11
你用的是哪个镜像源，我好像tce-load -wi samba不行，只能tce-load -wi samba3

我可以，也未問題

截圖上來看看

江南一根葱

hkkitlee 发表于 2019-8-16 19:24
我可以，也未問題

截圖上來看看

我用的是网易的源，可能我的tinycore和你版本不一样，我的是9x

hkkitlee

可能和諧了。你用「尋找」吧

江南一根葱

hkkitlee 发表于 2019-8-16 20:01
可能和諧了。你用「尋找」吧

我用samba3启动了，不过访问时要输入密码，看配置是允许guest访问的吧

hkkitlee

江南一根葱 发表于 2019-8-16 20:24
我用samba3启动了，不过访问时要输入密码，看配置是允许guest访问的吧

用不用密碼是看windows....不是linux...

是不是很「他媽的」呢～～

hkkitlee

心零 发表于 2019-8-16 09:26
菜鸟路过，教程不友好。

四張帖都看完？
看完完全不明白？
什麼地方不友好？
該怎麼寫才明白呢？

江南一根葱

hkkitlee 发表于 2019-8-16 20:34
用不用密碼是看windows....不是linux...

是不是很「他媽的」呢～～

搞定了。

[global]
workgroup = WORKGROUP
netbios name = tinycong
security = user
map to guest = Bad User
#map to guest = Bad Password
usershare allow guests = yes
server min protocol = SMB2_10
client min protocol = SMB2
client max protocol = SMB3
[share]
comment = share        // 共享的文件夹
path = /mnt/sda1     // 共享文件的目录
public = yes           // 是否公共属性
writable = yes
browseable=yes
available=yes
guest ok=yes  

hkkitlee

江南一根葱 发表于 2019-8-16 21:22
搞定了。

[global]

那我又試試

江南一根葱

hkkitlee 发表于 2019-8-16 21:46
那我又試試

#tar -zcvf samba.gz samba3
killall nmbd
killall smbd
rm -f /usr/local/etc/samba/smb.conf
cd /var/lib/tftpboot/app/tcz
tar -xvf samba3.gz -C samba3
su tc -c 'tce-load -i /var/lib/tftpboot/app/tcz/samba3/samba3.tcz'
sudo cat << EOF > /usr/local/etc/samba/smb.conf
[global]
workgroup = WORKGROUP
netbios name = tinycong
security = user
map to guest = Bad User
#map to guest = Bad Password
usershare allow guests = yes
server min protocol = SMB2_10
client min protocol = SMB2
client max protocol = SMB3
[C]
comment = test
path = /mnt/sda1
guest ok = yes
writeable = no
directory mode = 0777
create mask = 0777
map archive = no
map hidden = no
map read only = no
map system = no
store dos attributes = yes

[Pxe]
comment = tftpboot
path = /var/lib/tftpboot
writable = yes
public = yes
#guest ok = yes
#guest only = yes
browseable = yes
available = yes
create mask = 2777
force create mode = 0666
force directory mode = 2777
read only = No

[share]
comment = share      
path = /mnt/sda1   
public = yes         
writable = yes
browseable=yes
available=yes
guest ok=yes  

EOF

for s in $(ls /mnt); do
echo "
[$s]
comment = $s
path = /mnt/$s
guest ok = yes
writeable = no
directory mode = 0777
create mask = 0777
map archive = no
map hidden = no
map read only = no
map system = no
store dos attributes = yes
" >>/usr/local/etc/samba/smb.conf
done
cat /usr/local/etc/samba/smb.conf

sudo mkdir -p /var/lib/samba/private
sudo /usr/local/etc/init.d/samba restart &

cat << EOF >> /home/tc/help
windows command: net use z: \\ryantc\media /user:root root
EOF


今天任务完成了，for共享所有分区，

hkkitlee

江南一根葱 发表于 2019-8-16 22:18
#tar -zcvf samba.gz samba3
killall nmbd
killall smbd

你用的是什麼windows / pe?

江南一根葱

hkkitlee 发表于 2019-8-17 01:23
你用的是什麼windows / pe?

都是win10的  1809

hkkitlee

江南一根葱 发表于 2019-8-17 08:01
都是win10的  1809

明白

江南一根葱

楼主的自启脚本是写在哪的来着，我试了放/etc/profile.d会被执行两次 （加了桌面环境)

hkkitlee

江南一根葱 发表于 2019-9-6 13:34
楼主的自启脚本是写在哪的来着，我试了放/etc/profile.d会被执行两次 （加了桌面环境)

那你的版本是安裝在usb，還是像我的initramfs版？

江南一根葱

hkkitlee 发表于 2019-9-6 15:02
那你的版本是安裝在usb，還是像我的initramfs版？

是网启的，

友联电脑

那些文件早发现了，有几次我想联机看看你的启动速度，都是失败的，后来就没试了

hkkitlee

江南一根葱 发表于 2019-9-6 19:14
是网启的，

http://bbs.wuyou.net/forum.php?m ... &fromuid=678562

hkkitlee

友联电脑 发表于 2019-9-6 19:33
那些文件早发现了，有几次我想联机看看你的启动速度，都是失败的，后来就没试了

那因爲你輸入的賬密不正確

速度只是網絡付多少錢的事

江南一根葱

hkkitlee 发表于 2019-9-6 21:29
http://bbs.wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=415494&pid=3828018&fromuid=678562
...

加在开头么？加在未尾貌似会一直卡在网卡联网信息，

hkkitlee

江南一根葱 发表于 2019-9-6 22:06
加在开头么？加在未尾貌似会一直卡在网卡联网信息，

未尾
沒問題哦