Native子系统的 Cmd (Native Cmd) M2正式发布 -- 2011-07-22 (reg.exe,xcopy.exe)

cqflfzlyx

NativeCmd.rar解压后怎样使用呀

2012bomz

Please help me understand how nmount.exe, n7z.exe use.Ndrv,Nlist - what this program do? native load native.cfg - what does this mean?

I made little windows kernel, other system files put to ISO file, map this ISO file from USB flash with Grub4Dos, boot kernel - copy remaining files to system disk.Now I want compressed it

Great program.
In help CMD is wrong NCMD need.
XCOPY can't copy to fat16 RAM disk more than 240 files in one directory, from NTFS to NTFS - good. COPY works good.
DEFINED in IF command works like UNDEFINED
This is native defrag program
http://rghost.ru/37283700
Native Shell author send you regards. He prepare article about NCMD

[ 本帖最后由 2012bomz 于 2012-3-29 04:08 编辑 ]

2012bomz

Thanks. I decompress CAB files only and do this using Native Shell manualy. 7z - unsupported format, what version of 7zip need? WIM not mounted - may be some special structure of wim file need? I use last date version of NCMD.

This is official site of Ultra Defrag it's free I get this files from it
http://ultradefrag.sourceforge.net/en/index.html

My MotherBoard Asus crash and I don't have on-board USB ports. I use PCI-to-USB controller VIA. To boot from it I flash PLoP boot manager in my NetWork Intel 100 M flash chip. But PLoP good support only Intel chip, VIA chip - USB 2.0 low speed only, so I need to devided Windows PE to two part as linux do, to load "filesystem" through Windows USB driver. The difference in speed 1 mb per sec - 32 mb per sec. All works good with NCMD but now I want to compress filesystem. I read all topic using Google Translator. Find n7z nmount ncab and etc.

[ 本帖最后由 2012bomz 于 2012-3-29 14:44 编辑 ]

2012bomz

of course I use 7z format 4.65 version, it's well known in our country format. I download old version too 3.13. May be you know that very last 7zip make archive which may not support old version.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
ncmd.exe /c nautorun.bat
native.exe      - here native shell for stop and make reboot

@echo off
md x:\tools
x:\i386\system32\nmount.exe c:\filesystem.wim x:\tools

not work  

[ 本帖最后由 2012bomz 于 2012-3-29 15:34 编辑 ]

2012bomz

thanks. wimfltr.sys only put it system32? just try it

native.exe  load  nautorun.bat
please give me URL of native.exe. When I said NativeShell I mean http://hex.pp.ua/nt-native-applications-shell-eng.php

WIMFLTR.SYS system32\drivers exist. I need load it some special method?

[ 本帖最后由 2012bomz 于 2012-3-29 15:51 编辑 ]

2012bomz

OK. Now I find this registry key

2012bomz

HKLM...session manager
native.exe

nloadsys.exe default wimfltr.sys system32\drivers
if exist C:\winpe.wim mount C:\winpe.wim X:\

mount success

all OK. in all directories files appear Programs, i386, system32\lang ... except \system32


How using native make
for %%i in (C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z) do if exist %%i:\SVPE\winpe.wim set LETTER=%%i
?

[ 本帖最后由 2012bomz 于 2012-3-29 18:02 编辑 ]

2012bomz

OK. I try to do something like
if exist C:\winpe.wim mount C:\winpe.wim 1 X:\i386
if exist C:\winpe.wim mount C:\winpe.wim 2 X:\Programs
........................
if exist Z:\winpe.wim mount Z:\winpe.wim 1 X:\i386
if exist Z:\winpe.wim mount Z:\winpe.wim 2 X:\Programs

thttht

friend8179 想请教你一些关于Native Cmd的问题！

我在正常的win2003系统（不是PE系统）里想启动到Native Cmd环境里用Native Cmd里的 reg.exe 添加注册表项！
可我试了多次都没有成功！不知道你用过 reg.exe 这个添加注册表项吗？应该如何设置运行啊？


启动到Native Cmd环境后， 我是这样写的：

reg.exe add c:\a.reg

a.reg是我备份好的要添加的注册表文件！

2011足迹

reg的命令语法错误..具体用法可以看win23下reg的help
regedit 才能直接处理.reg文件

2012bomz

in which form ncab.exe files list do?

ncab.exe -d list.txt c:\default.cab x:\i386\system32

advapi.dll
kernel32.dll

ansi unicode?

sorry -d mean only = list files IN cab file

[ 本帖最后由 2012bomz 于 2012-3-29 20:29 编辑 ]

thttht

原帖由 2011足迹 于 2012-3-29 20:16 发表
reg的命令语法错误..具体用法可以看win23下reg的help
regedit 才能直接处理.reg文件

足迹大大我这里是 win23 下 ，但添加注册表 a.reg 时是系统刚启动到你的 Native子系统时添加，用的是Native子系统里的那个 reg .exe 程序！！！！

这时的 regedit 应该还不能运行吧？是不是 Native子系统里的这个reg .exe 程序不能这样用啊？看Native子系统里的这个reg.exe 程序的帮助只有add 和dell。。。参数，应该是添加和删除！



friend8179 大大 应该也是误解我是在  win23 环境里运行了吧？

我想问的是 Native子系统里的那个 reg .exe 程序如何对注册表进行操作。

[ 本帖最后由 thttht 于 2012-3-29 23:32 编辑 ]

2012bomz

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WimFltr
Start=0x00000001

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

ncmd.exe /c nautorun.bat
native.exe load native.cfg
ncmd.exe /c nautorun.cmd

nautorun.bat

@echo off
for %%i in (C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z) do if exist %%i:\winpe.wim set LETTER=%%i
if defined %LETTER% (
ECHO FileSystem not found
NCMD
) ELSE (
ECHO mount %LETTER%:\winpe.wim B:\>>native.cfg
ECHO exit>>native.cfg
)

nautorun.cmd

@echo off
ECHO load filesystem.....
FOR /F %%I IN ('DIR /S /B /A:-D B:\I386') DO copy %%I X:%%~pnxI>nul
FOR /F %%I IN ('DIR /S /B /A:-D B:\Programs') DO copy %%I X:%%~pnxI>nul

2012bomz

@echo off
for %%i in (C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z) do if exist %%i:\winpe.wim set LETTER=%%i
if defined %LETTER% (
ECHO FileSystem not found. Call reboot.
ECHO OFF>>native.cfg
) ELSE (
MD B:\FS
ECHO mount %LETTER%:\winpe.wim B:\FS>>native.cfg
ECHO exit>>native.cfg
)

@echo off
ECHO copy filesystem.....
SETLOCAL ENABLEDELAYEDEXPANSION
FOR /F %%I IN ('DIR /S /B /A:-D B:\FS\I386') DO (
SET A=%%~pnxI
copy %%I X:!A:~3%!>nul
)
FOR /F %%I IN ('DIR /S /B /A:-D B:\FS\Programs') DO (
SET A=%%~pnxI
copy %%I X:!A:~3%!>nul
)

[ 本帖最后由 2012bomz 于 2012-3-30 05:41 编辑 ]

thttht

原帖由 friend8179 于 2012-3-29 23:57 发表
估计没这个功能，add是用来直接修改键值。。。

谢谢大大解答！看来我想要效果目前还不能完全实现啊!

一只猴子

足迹大大终于出现！请问NATIVE SHELL和MINI NATIVE PECMD啥时候更新？

2012bomz

Is it possible to get sources codes of Native Shell + ?


* to mount wim file to directory on system disk X: under winpe with native.exe this directory must be created in wim file, but not with MD command
WINPE.TURBOUSB.X.EXE  41,3 МБ (43 373 808 байт)

[ 本帖最后由 2012bomz 于 2012-4-1 06:36 编辑 ]

2011足迹

代码在http://code.google.com/p/nativeshell/
wim mount使用的是liulaotou提供的一个库...没有代码..你可以在论坛里搜到

2011足迹

这个还是可以实现的...直接把reg文件转过了就好了注册表操作通常只有两个add和del修改也要用add

2011足迹

最近是没时间更新了....

thttht

原帖由 2011足迹 于 2012-3-31 22:17 发表
这个还是可以实现的...直接把reg文件转过了就好了注册表操作通常只有两个add和del修改也要用add

足迹大大您说的 “把reg文件转过了”什么意思阿？你能不能给个转换好的reg文件并给个命令示范阿？这个命令我试验了很长时间也没有搞成功！方法老是不对阿！！！你很忙，给你添麻烦了！！！

2011足迹

.reg文件是可以转换成reg add命令的可以手工做..好像也有工具可以转..自己研究一下吧

2012bomz

Of course google translator makes a lot for humans communication, and I read all this topic, half about Native Shell and see forum, but exactly this I don't understand. sorry
I send URL to AMDF and we all hope that he write something else for Native Shell

In English much better

Code in http://code.google.com/p/nativeshell/
. wim the mount to use is liulaotou provided a library ... no code .. you can search in the forum

[ 本帖最后由 2012bomz 于 2012-4-1 06:53 编辑 ]

2012bomz

With 7zip format the deal is - I use for creating 7zip archives http://www.7-zip.org/ , but must use http://www.haozip.com/Eng/index_en.htm . With this archive program all OK

2012bomz

ELSE - ncmd don't return error but it don't work
NOT DEFINED - not work, only DEFINED. use if "%value%"=="" .... if not "%value%"==""

nloadsys.exe in native.cfg work not fully correct, from interpreter command line - good.
in native.cfg nloadsys.exe may load only 1 driver, other strings of batch file execute good, but if you don't use exit command line don't work

[ 本帖最后由 2012bomz 于 2012-4-3 03:55 编辑 ]

2012bomz

Hi.Help me please. I find this http://www.vdisk.cn/down/index/10040847 - here wim mount to system32
what command SCD do?

2012bomz

Thanks!!!

kcyou

强烈希望NATIVE CMD更新！

junyee

看LZ好久没有更新了

不知道能不能有办法把 二级内核WIM包以可写方式挂载,这样就不用开FBWF了.

2011豪杰兴邦

我用了native shell和native CMD，前者没有啥问题，但是后者有些问题。
1.无法删除输入错误的字符。
2.在物理计算机2003系统，通过native shell启动会蓝屏，但是xp pe下面正常。
3.部分native程序没有命令提示，而这些程序在native shell下面正常显示命令提示。