RUN 1206 更新 支持磁盘交换,文件检索,自动菜单,自动列表,全自动安装nt5x系统

peter1123

sratlf 发表于 2013-8-6 16:05
你试下用dpms参数呢  srs用的是hotdll的f6img  没怎么注意看ide情况怎么处理的。。。

果然！
DPMS搞定！

527104427

sratlf 发表于 2013-8-6 16:05
你试下用dpms参数呢  srs用的是hotdll的f6img  没怎么注意看ide情况怎么处理的。。。

我试了一下，软盘弄成下面的形式是最强壮的，不管启动PE还是安装系统，一律不会蓝屏，也不会提示插入A盘：

A盘空，B盘SRS；或A盘SRS，B盘FIRADISK/WINVBLOCK；或A盘FIRADISK/WINVBLOCK，无B盘

yunyan100

并不是所有的iso文件都行,比如易通erd就不能成功能启动,在滚动菜单后会蓝屏

2012sxz

(1)
set front=--e820cycles=3 --fira srs
command RUN --automenu /iso/
(2)
command RUN --e820cycles=3 --fira srs --automenu /iso/

请问以上两条命令在安装系统或启动PE时有什么区别？

无垠

谢S大，学习了。如果不用PXE功能的话，7.24版与新版没啥区别吧？

sratlf

527104427 发表于 2013-8-6 17:02
我试了一下，软盘弄成下面的形式是最强壮的，不管启动PE还是安装系统，一律不会蓝屏，也不会提示插入A盘： ...

我就不折腾了  xp已经好几年没用过了。。。

sratlf

2012sxz 发表于 2013-8-9 22:43
(1)
set front=--e820cycles=3 --fira srs
command RUN --automenu /iso/

应该是没什么区别  一个是真正启动iso时才加载驱动  另一个是先加载驱动  再显示iso列表

sratlf

无垠 发表于 2013-8-10 08:21
谢S大，学习了。如果不用PXE功能的话，7.24版与新版没啥区别吧？

恩  新版只是改了和pxe有关的内容

2012eye

谢谢谢谢谢谢  学习了

2012hb520wz

老大，我想问下fira和wvbk驱动可不可以同时加载？

sratlf

2012hb520wz 发表于 2013-8-14 19:23
老大，我想问下fira和wvbk驱动可不可以同时加载？

不可以 。。。

2012hb520wz

sratlf 发表于 2013-8-14 22:41
不可以 。。。

可是我试了好多加载两个的也没有发现什么问题呢？

sratlf

2012hb520wz 发表于 2013-8-14 23:04
可是我试了好多加载两个的也没有发现什么问题呢？

是没什么问题  不过还是不建议使用

2012hb520wz

sratlf 发表于 2013-8-14 23:08
是没什么问题  不过还是不建议使用

多谢老大指点！

cj2018

请问S大,0PE量产到U盘在进入SRUN"启动任意镜像等"后,返回上级菜单中只能看到U盘量产区和本地硬盘分区,却不能看到U盘FAT32区.我的ISO文件都随意放在U盘FAT32区,进桌面是可见的.这种情况是BIOS的局限?还是g4d、SRUN的bug?谢谢.

sratlf

cj2018 发表于 2013-8-15 13:27
请问S大,0PE量产到U盘在进入SRUN"启动任意镜像等"后,返回上级菜单中只能看到U盘量产区和本地硬盘分区,却不能 ...

估计u盘是被识别成fd了吧  为了避免搜索文件死机RUN默认是不搜索fd的  你可以在启动后按c进命令行  执行set usrdev=chpuf  然后再看看

fxq

支持

2012apple3000

Hello. Good Afternoon.!

recently, I try install to VHD with Sysprep Ghost Image XP. or Non-sysprep Image XP Universal Image. Directly Booting to Any PC.
But Two are both failed with bluescreen.

Run --fira disk=/winxp.vhd.

At VHD, Only Setup XP ISO? why Do I Fail to Using sysprepXP or Not-sysprep Image?

I tried like below.

1. Make VHD (Fixed.) and Active and PBR NT52.
2. extract to VHD with GhostImage.
3. Inject Firadisk driver(Txtsetup.oem) to VHD Windows. (with Driverinjection program)
4. Boot . RUN --fira disk=/winxp.vhd.
5. bluescreen Occured. Both AHCI MODE and IDE MODE.

2012apple3000

Hello. Good Afternoon.!

recently, I try install to VHD with Sysprep Ghost Image XP. or Non-sysprep Image XP Universal Image. Directly Booting to Any PC.
But Two are both failed with bluescreen.

Run --fira disk=/winxp.vhd.

At VHD, Only Setup XP ISO? why Do I Fail to Using sysprepXP or Not-sysprep Image?

I tried like below.

1. Make VHD (Fixed.) and Active and PBR NT52.
2. extract to VHD with GhostImage.
3. Inject Firadisk driver(Txtsetup.oem) to VHD Windows. (with Driverinjection program)
4. Boot . RUN --fira disk=/winxp.vhd.
5. bluescreen Occured. Both AHCI MODE and IDE MODE.

sratlf

2012apple3000 发表于 2013-8-22 14:58
Hello. Good Afternoon.!

recently, I try install to VHD with Sysprep Ghost Image XP. or Non-syspre ...

hi apple, good.

can you try to press F8 immediately after run the command Run --fira disk=/winxp.vhd,
then choose disable automatic restart after boot failure to check the BSOD code?
also you can try the menu as below,

1. title Boot from IMG
   
2. map --heads=2 --sectors-per-track=18 --mem (md)0x800+4 (99)
   
3. map /winxp.vhd (hd0)
   
4. map --hook
   
5. write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd,boot;\n\0
   
6. rootnoverify (hd0)
   
7. chainloader +1
   
8. boot

复制代码

2012apple3000

I Used Non-sysprep Image For any PC. Generally No problem to Any PC.
applied ntldr longhorn, and SRS . etc.

MY VHD XP :
I use firadisk . ver firadisk-driver-0.0.1.30-f6
After reg hive SYSTEM in VHD, changed autoreboot value 0.
So like this image.

2012apple3000

sratlf 发表于 2013-8-22 15:09
hi apple, good.

can you try to press F8 immediately after run the command Run --fira disk=/winx ...

Thanks.
I Wrote reply. but my reply was deleted in this BBS. Why?? It is often to me.. ㅠㅠ.
Am I BlackList?^^

Good. As Your Parse, I Succeed. I can see DeskTOP. Good!@!!

is it possible your RUN ?
RUN --fira disk=/winxp.vhd. I Want to use This.

2012apple3000

Like This.
But your answer is Good to ME. I Succeed. Very Thanks

2012apple3000

sratlf 发表于 2013-8-22 15:09
hi apple, good.

can you try to press F8 immediately after run the command Run --fira disk=/winx ...

But Until Desktop, It Takes a long Time. 2 minute.. Why it is... I Dont Know.

sratlf

2012apple3000 发表于 2013-8-22 16:49
But Until Desktop, It Takes a long Time. 2 minute.. Why it is... I Dont Know.

i`m trying to find why RUN did`t work... i have no idea about why need so long time before desktop, but maybe you can try to modify the menu like below, no ",boot"

write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0

2012apple3000

I Wrote That "It takes so long Time before desktop". It's my mistake. my problem. Sorry.

and I can't see your answer and replying to You. Just it is showed to me like this image.


I hope Your RUN will be patched for this.

sratlf

2012apple3000 发表于 2013-8-23 15:53
I Wrote That "It takes so long Time before desktop". It's my mistake. my problem. Sorry.

and I ca ...

my reply was also deleted by the BBS, and just recovered... i do not know why...

so now it`s working fine? do not need too long time to see the desktop?

2012apple3000

sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...

so now it`s wo ...

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...

so now it`s wo ...

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.