RUN 1206 更新 支持磁盘交换,文件检索,自动菜单,自动列表,全自动安装nt5x系统

2012apple3000

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . .
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...

so now it`s wo ...

Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally ..
I turned off my PC. Tried again. Same problem..
I went to Home.

promise2000

I am apple3~,too.

Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.
So, I rejoined this bbs.

Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.

Non-Sysprep XP Image worked Fine. Good.

But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.

and Today I tried to Make vhd using SYSPREP XP Ghost-Image.

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

MY Bios is AHCI Mode.

Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.

Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally ..
I turned off my PC. Tried again. Same problem..
I went to Home.

2012apple3000

我不知道为什么我的帖子被删除。
我已经写了几次，同一职位。

我创建了文章后，已确认，立即删除。
BBS的问题是，我不知道。
我在英语写作，不知道是否删除。
所以这个时候，翻译成中文写。

语法正常工作。桌面并不需要很长时间才能看到。
VHD启动速度更快。

非Sysprep XP（不封口XP）图像上面的方法行之有效。

我也尝试过这种方式，但发生蓝屏。
"write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"

接下来，我SYSPREP XP鬼形象“创建使用VHD。

1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.

我的主板是BIOS的AHCI模式。

当第一次启动时，很长一段时间，XP徽标酒吧和进步继续。
关闭电脑，并重新打开它，所以我尝试了很多麻烦。
然而，一段时间后Sysprep安装过程已经开始。
EasyDriver启动，并，内置已经安装。

当第二次开机，XP徽标和进度条很长一段时间，我看了。
这一次，它继续进行。
我关闭PC。但问题依旧。

Today, 暂停选项GRUB的语法，我“pause”选项，我试着给结果。
Like This.

title Boot from VHD XP 10G
find --set-root /winxp10.vhd
map --heads=2 --sectors-per-track=18 --mem (md)0x800+4 (99)
map /winxp10.vhd (hd0)
map --hook
write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp10.vhd,boot;\n\0
rootnoverify (hd0)
chainloader +1
boot
pause Press any key . . .

Result,
At Above Line,

autodetect number-of-heads failed. Use the specified 2
autodetect sectors-per-track failed. Use the specified 18

VHD引导去这样锯出现。
蓝屏或引导很长一段时间，我想其原因，这是一个问题吗？

sratlf

2012apple3000 发表于 2013-8-26 09:17
我不知道为什么我的帖子被删除。
我已经写了几次，同一职位。

hi, sorry for the late reply, just busy with other things and have little time to view bbs.
your articles all have been recovered, i also have no idea for why bbs deleted these automatically...

for the long time spent on the progress bar, it`s due to some unknown issue caused by firadisk driver.
you can try both "...find:/winxp.vhd;\n\0" and "...find:/winxp.vhd,boot;\n\0", maybe someone working, do not need to wait so long time.

attachment is RUN script using "...find:/winxp.vhd,boot;\n\0" when booting winxp.vhd, you can also have a try, good luck.

2012apple3000

sratlf 发表于 2013-9-2 10:18
hi, sorry for the late reply, just busy with other things and have little time to view bbs.
your  ...

Thank your for your help even though you are busy.

2012eye

谢谢谢谢谢谢

cszwin

好东西 一并收下

2012zhiwen

我在pxe模式下调用menu.lst   有些电脑显示屏可以正常显示，也可以自动更换背景。但有些电脑的显示屏会黑黑的，只有一个光标闪闪的。恳请老大关注一下。。。。。

指南针

安装xp
从iso镜像启动时，map和mpa--mem是怎么判断的，默认是map-mem?还是要加参数指定?

十二彩虹

阅读权限20要多久啊

shan

出现这个现象了，版主看看是怎么回事？

jinhui3310

我顶，真是强大.....

yunyan100

一个问题反馈下,自动列表菜单,在虚拟机下测试没问题,在真机下出现问题,选对菜单后如图1那样,在几个页面间循环(好像还有一个是16进制代码没照到),大概1分钟左右出现如图2那样,是个空菜单,下面附上菜单代码

1. title 【05】--自动菜单(/EXIMGS:SratlfRUN模块) \n 列出Eximgs目录下的iso,img,ima,isz,gz文件
   
2. clear
   
3. command --set-path=/BOOT/GRUB/
   
4. set image=splashimage /BOOT/GRUB/bg.gz
   
5. set font=font /BOOT/GRUB/unifont.hex.gz
   
6. set showsize=1
   
7. RUN --automenu-all --show.iso.img.ima.gz.isz /EXIMGS/

复制代码

麻烦给看下这样是否有错,还是其他 什么原因,谢谢

2012apple3000

Long time no see. have you ever been fine?
Thanks for your help always.
When I boot 7PE or 8PE.iso, I found this.

This is that If PE included firadisk driver, PE is automatically mounted to Virtual CD-ROM after booting.

First,  PE has firadisk service As service SYSTEM-registry and system32\drivers\firadisk.sys.
Second, Use following grub syntax.

from 2011doberman's 81pe

title Win8.1PE(Drivers)(Firadisk)
map --mem (md)0x800+4 (99)
map /Win8.1PE(Drivers).iso (0xff)
map --hook
write (99) [FiraDisk]\nStartOptions=cdrom,vmem=find:/Win8.1PE(Drivers).iso;\n\0
chainloader (0xff)/W8PE/bootmgr

or my method like this, with variable.

title W81PE_HC81PE Fira
set MYISO=HC81PE.ISO
map--mem (md)0x800+4 (99)
map /Image/%MYISO% (0xff)
map --hook
write (99) [FiraDisk]\nStartOptions=cdrom,vmem=find:/Image/%MYISO%;\n\0
chainloader (0xff) || chainloader (0xff)/BOOTMGR

So, I would like to use your RUN.

how to do this?
I tried several times, but was Not mounted.

syntax,
run --fira /8PE.ISO
run --mem --fira /8PE.ISO
..
..
..
not mounted.

So If you possible, At next version , I hope now you reflect this method.
run --cd /8PE.ISO (directly boot and virtual CD-ROM)
run --mem --cd /8PE.ISO (loading to RAM and virtual CD-ROM)
or with any --para..
Thank you.

2012apple3000

我的帖子被删了。

So, I write again
-------------------------------------------
Long time no see. have you ever been fine?
Thanks for your help always.
When I boot 7PE or 8PE.iso, I found this.

This is that If PE included firadisk driver, PE is automatically mounted to Virtual CD-ROM after booting.

First,  PE has firadisk service As service SYSTEM-registry and system32\drivers\firadisk.sys.
Second, Use following grub syntax.

from 2011doberman's 81pe

title Win8.1PE(Drivers)(Firadisk)
map --mem (md)0x800+4 (99)
map /Win8.1PE(Drivers).iso (0xff)
map --hook
write (99) [FiraDisk]\nStartOptions=cdrom,vmem=find:/Win8.1PE(Drivers).iso;\n\0
chainloader (0xff)/W8PE/bootmgr

or my method like this, with variable.

title W81PE_HC81PE Fira
set MYISO=HC81PE.ISO
map--mem (md)0x800+4 (99)
map /Image/%MYISO% (0xff)
map --hook
write (99) [FiraDisk]\nStartOptions=cdrom,vmem=find:/Image/%MYISO%;\n\0
chainloader (0xff) || chainloader (0xff)/BOOTMGR

So, I would like to use your RUN.

how to do this?
I tried several times, but was Not mounted.

syntax,
run --fira /8PE.ISO
run --mem --fira /8PE.ISO
..
..
..
not mounted.

So If you possible, At next version , I hope now you reflect this method.
run --cd /8PE.ISO (directly boot and virtual CD-ROM)
run --mem --cd /8PE.ISO (loading to RAM and virtual CD-ROM)
or with any --para..
Thank you.

non11non

好东西。谢谢分享

sratlf

shan 发表于 2013-11-9 11:18
出现这个现象了，版主看看是怎么回事？

用的什么命令出现的这个现象  能固定重现问题吗

sratlf

yunyan100 发表于 2013-11-13 17:58
一个问题反馈下,自动列表菜单,在虚拟机下测试没问题,在真机下出现问题,选对菜单后如图1那样,在几个页面间循 ...

貌似是执行什么命令  超出了可访问范围造成的  应该算个案吧  我看下能不能解决

sratlf

2012apple3000 发表于 2013-11-19 15:13
我的帖子被删了。

So, I write again

yeah, many things happened and now back to normal, it`s good, thanks :)

for the iso file mapping, that is a good suggestion, let me try to achieve it in next version.

shan

sratlf 发表于 2013-12-5 23:20
用的什么命令出现的这个现象  能固定重现问题吗

title   RUN Module \n   >>>>\n      选择RUN自动化模块功能 ！              
command /boot/grub/run --autolist
实机下一样是这样的情况。虽然不影响使用，但看起来乖乖的。
第一引导 bootmgr,转入VBE下运行RUN ，IMGS放在BOOT目录下。
一直对VBE不懂，你看这些菜单头对吗？可以在优化一下吗？因为加载背景图出来有些慢。
debug off
call Fn.0 0x40000 "!BAT\necho -P:0000 $[0000]\t\t\t\t\t\t\t\t\t\0" && initscript (md)0x200+1
color normal=0x0F highlight=0x0E helptext=0x0A heading=0x07 standard=0x02 border=0x77
graphicsmode -1 1024 768 24
splashimage /BOOT/GRUB/back.lzma
font && font /BOOT/GRUB/UNIFONT.HEX
timeout 30
default 3
HOTKEY
write 0x8274 0x2001
terminal --font-spacing=1:9
menuset m x=30 y=20 h=16 b=30 n=0

sratlf

shan 发表于 2013-12-6 10:38
title   RUN Module \n   >>>>\n      选择RUN自动化模块功能 ！              
command /boot/grub/r ...

实机也这样的话用下面的菜单看看  如果效果一样的话用dir /b 生成一个imgs下的文件目录给我

title   RUN Module \n   >>>>\n      选择RUN自动化模块功能 ！  
menuset u            
command /boot/grub/run --autolist

菜单头没什么问题   你用的背景图是多大的  体积越大的背景图加载的越慢  显示的就越慢

shan

sratlf 发表于 2013-12-6 15:17
实机也这样的话用下面的菜单看看  如果效果一样的话用dir /b 生成一个imgs下的文件目录给我

title   R ...

1024 768 的。等我测试一下，马上反馈给您。

shan

修改参数，正常显示了。谢谢斑竹，没有想到如此的简单就完美解决了

shan

忘记了，这在系统下补上C:\Users\shan11\Desktop\MACKISO\ISO\BOOT\IMGS
┝0PE.ISO
┝ATIHx64.IMA
┝AUTOMENU.GZ
┝DG.IMG
┝DiskGenius4.5.ima
┝FIRADISK.IMG
┝FIXMBR.IMA
┝GHOST11.5.IMG
┝JM-YPJC.IMG
┝KV2006.IMG
┝MAXDOS.IMG
┝MAXDOS9.3.IMG
┝MT50B1.IMG
┝NTBOOT.ISO
┝OKDOS.IMA
┝REMOVE.IMG
┝TEST.IMA
┝UGHOST.IMG
┝W7MT.IMG
┝XLY.IMG
┝XPM.ISO

sratlf

shan 发表于 2013-12-6 15:46
修改参数，正常显示了。谢谢斑竹，没有想到如此的简单就完美解决了

正常了就行  就是显示区域设置的问题  以前有别人也碰到过  也是显示的莫名其妙的。。。

1024×768的分辨率不算小了。。。尽量找个体积小点的背景图吧

shan

sratlf 发表于 2013-12-6 17:23
正常了就行  就是显示区域设置的问题  以前有别人也碰到过  也是显示的莫名其妙的。。。

1024×768的 ...

习惯这个分辨率了，还可以忍受，也就是慢个3-4秒。

yunyan100

sratlf 发表于 2013-12-5 23:22
貌似是执行什么命令  超出了可访问范围造成的  应该算个案吧  我看下能不能解决

en,是的,在华硕本本f2j上出现的,其他的机子没发现,tks