国产开源U盘启动工具——Ventoy 【2024/01/24 1.0.97 版本发布】

xsaxycn

一个字，牛

Syl1us

无垠 发表于 2022-11-20 08:45
在联想X280笔记本上，开启安全启动还是不行的。

我的意思是老的BIOS不支持新的bootx64.efi(shimx64.efi)，老电脑用旧的bootx64.efi。

兄弟电脑_小许

我发不了帖啊、。。。。。

gaohuagxc

牛批，很好用

newpe

这个很好用，要是能默认隐藏efi分区就更好了？

2012luomaisi

支持回复#支

longpanda

2022/12/04 Ventoy-1.0.83 版本发布，欢迎使用。

hxhua

不断优化升级，好工具，感谢楼主分享，辛苦啦

幸运的草

新的1.0.83版本测试发现有如下问题：
1、全局设置菜单中，设置默认的搜索目录不起作用，而之前的版本有效。
2、设置菜单语言为中文，但在F5工具菜单中的“硬件信息”和“键盘布局”下面的菜单文字仍是英文，没有改成中文。

longpanda

2022/12/04 Ventoy-1.0.84 版本发布，欢迎使用。

longpanda

幸运的草 发表于 2022-12-4 14:51
新的1.0.83版本测试发现有如下问题：
1、全局设置菜单中，设置默认的搜索目录不起作用，而之前的版本有效 ...

1、1.0.83版本有个BUG，刚更新了1.0.84，你可以试试。
2、当前首个版本可能有些地方修改不全，后面会慢慢补充。

mnuw

越来越好 谢谢

幸运的草

longpanda 发表于 2022-12-4 15:56
1、1.0.83版本有个BUG，刚更新了1.0.84，你可以试试。
2、当前首个版本可能有些地方修改不全，后面会慢 ...

刚刚升级到1.0.84，这两个问题仍存在！估计是没有修改。

longpanda

幸运的草 发表于 2022-12-4 17:00
刚刚升级到1.0.84，这两个问题仍存在！估计是没有修改。

第一个搜索目录我自己测试了一下是好使的。

理想不想理

Ventoy 官方支持中文菜单了！发帖留念！

sgyfx

      下载试用了，非常好，有中文菜单，解决了英语不太好的人员使用，很方便了！建议给“Ventoy”起个中文名字！向 “Ventoy” 工作团队所有人员致敬！非常感谢你们！

alimxp2006

longpanda 发表于 2022-12-4 17:29
第一个搜索目录我自己测试了一下是好使的。

很棒的工具！

只能识别USB上的设备，不支持SATA的是吧？ 有点遗憾。

我发觉用直接插主板的硬盘抽取盒比用USB口的移动硬盘用起来更爽。

longpanda

alimxp2006 发表于 2022-12-5 11:24
很棒的工具！

只能识别USB上的设备，不支持SATA的是吧？ 有点遗憾。

支持的，只是默认只列出来USB接口的磁盘，可以勾选 选项---> 显示所有设备  来显示所有的磁盘。

幸运的草

longpanda 发表于 2022-12-4 17:29
第一个搜索目录我自己测试了一下是好使的。

你看，我U盘winpe目录下，有5个文件。设置默认搜索\winpe目录。




下面是显示的结果


非winpe目录下的也出来了。1.0.82及以下的没这个情况。也就是1.0.84版，默认搜索目录设置不管用，相关于全盘搜索。真机实测也是一样的情况。

longpanda

幸运的草 发表于 2022-12-5 14:02
你看，我U盘winpe目录下，有5个文件。设置默认搜索\winpe目录。

你对这个配置文件的多模式选项可能没完全理解。
我看你同时配置了  control  以及 control_legacy/control_uefi/control_xxxx
这个是没必要的。
以 UEFI 模式为例，如果你配置了 control_uefi，则在UEFI模式下，完全以 control_uefi 那个TAB页下的配置为准，这个control页下的就无效了 。你没有配置 control_uefi 的情况下，在UEFI模式下才会使用 control这个tab页下的配置。

也就是说  control 和 control_uefi 是互斥的关系，不是包含的关系。

alimxp2006

longpanda 发表于 2022-12-5 12:43
支持的，只是默认只列出来USB接口的磁盘，可以勾选 选项---> 显示所有设备  来显示所有的磁盘。

谢谢提醒，才看到。赞！

幸运的草

longpanda 发表于 2022-12-5 14:07
你对这个配置文件的多模式选项可能没完全理解。
我看你同时配置了  control  以及 control_legacy/contr ...

好，谢谢，我改过来！
原来是这里配置的问题，只配置第一项contrlo，默认搜索目录正常了。

db708

##################################################################################
######################### Ventoy2DiskX86 (1.0.81) #########################
##################################################################################
[2022/12/05 15:46:07.880] Current directory:<C>
[2022/12/05 15:46:07.885] id=8320/4428
[2022/12/05 15:46:07.886] PPath:<C:\Windows\explorer.exe>
[2022/12/05 15:46:07.906] PSize:<3229696 3154KB>
[2022/12/05 15:46:07.906] Lunch main process 0
[2022/12/05 15:46:07.907] Control Flag: 0 1 1
[2022/12/05 15:46:07.908] Windows Version: <<Windows 7 SP1 64-bit>>
[2022/12/05 15:46:07.908]
===================== Enum All PhyDrives =====================
[2022/12/05 15:46:07.910] RegOpenKeyExA <SYSTEM\CurrentControlSet\Services\disk\Enum> Ret:0
[2022/12/05 15:46:07.910] RegQueryValueExA <Count> ret:0  Size:4 Value:3
[2022/12/05 15:46:07.910] GetPhysicalDriveCount: 3
[2022/12/05 15:46:07.911] Logical Drives: 0x160033c
[2022/12/05 15:46:07.911] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:107376279552
[2022/12/05 15:46:07.911] C --> 0
[2022/12/05 15:46:07.912] LogicalDrive:\\.\D: PhyDrive:1 Offset:1048576 ExtentLength:492830720000
[2022/12/05 15:46:07.912] D --> 1
[2022/12/05 15:46:07.912] LogicalDrive:\\.\E: PhyDrive:0 Offset:107380473856 ExtentLength:132676321280
[2022/12/05 15:46:07.913] E --> 0
[2022/12/05 15:46:07.913] LogicalDrive:\\.\F: PhyDrive:1 Offset:492831768576 ExtentLength:507370274816
[2022/12/05 15:46:07.914] F --> 1
[2022/12/05 15:46:07.945] Could not open the disk<\\.\I:>, error:5
[2022/12/05 15:46:07.955] I --> -1
[2022/12/05 15:46:07.956] LogicalDrive:\\.\J: PhyDrive:2 Offset:1048576 ExtentLength:32356894208
[2022/12/05 15:46:07.956] J --> 2
[2022/12/05 15:46:07.959] Could not open the disk<\\.\V:>, error:5
[2022/12/05 15:46:07.963] V --> -1
[2022/12/05 15:46:07.966] Could not open the disk<\\.\W:>, error:5
[2022/12/05 15:46:07.966] W --> -1
[2022/12/05 15:46:07.968] Could not open the disk<\\.\Y:>, error:5
[2022/12/05 15:46:07.968] Y --> -1
[2022/12/05 15:46:07.969] Create file Handle:00000084 \\.\PhysicalDrive0 status:0
[2022/12/05 15:46:07.969] PHYSICALDRIVE0 size 240057409536 bytes
[2022/12/05 15:46:07.970] Create file Handle:00000084 \\.\PhysicalDrive1 status:0
[2022/12/05 15:46:07.970] PHYSICALDRIVE1 size 1000204886016 bytes
[2022/12/05 15:46:07.970] Create file Handle:00000084 \\.\PhysicalDrive2 status:0
[2022/12/05 15:46:07.971] PHYSICALDRIVE2 size 32360103936 bytes
[2022/12/05 15:46:07.972] PhyDrv:0 BusType:SATA Removable:0 Size:240GB(240057409536) Name: KINGSTON SA400S37240G
[2022/12/05 15:46:07.972] PhyDrv:1 BusType:SATA Removable:0 Size:1024GB(1000204886016) Name: WDC WD10EZEX-08WN4A0
[2022/12/05 15:46:07.972] PhyDrv:2 BusType:USB  Removable:1 Size:32GB(32360103936) Name:Mass Storage Device
[2022/12/05 15:46:07.972] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:107376279552
[2022/12/05 15:46:07.973] Logical Drive:C  ===> PhyDrive:0
[2022/12/05 15:46:07.973] LogicalDrive:\\.\D: PhyDrive:1 Offset:1048576 ExtentLength:492830720000
[2022/12/05 15:46:07.973] Logical Drive:D  ===> PhyDrive:1
[2022/12/05 15:46:07.974] LogicalDrive:\\.\E: PhyDrive:0 Offset:107380473856 ExtentLength:132676321280
[2022/12/05 15:46:07.974] Logical Drive:E  ===> PhyDrive:0
[2022/12/05 15:46:07.974] LogicalDrive:\\.\F: PhyDrive:1 Offset:492831768576 ExtentLength:507370274816
[2022/12/05 15:46:07.974] Logical Drive:F  ===> PhyDrive:1
[2022/12/05 15:46:08.006] Could not open the disk<\\.\I:>, error:5
[2022/12/05 15:46:08.006] Logical Drive:I  ===> PhyDrive:-1
[2022/12/05 15:46:08.007] LogicalDrive:\\.\J: PhyDrive:2 Offset:1048576 ExtentLength:32356894208
[2022/12/05 15:46:08.007] Logical Drive:J  ===> PhyDrive:2
[2022/12/05 15:46:08.009] Could not open the disk<\\.\V:>, error:5
[2022/12/05 15:46:08.010] Logical Drive:V  ===> PhyDrive:-1
[2022/12/05 15:46:08.012] Could not open the disk<\\.\W:>, error:5
[2022/12/05 15:46:08.012] Logical Drive:W  ===> PhyDrive:-1
[2022/12/05 15:46:08.014] Could not open the disk<\\.\Y:>, error:5
[2022/12/05 15:46:08.014] Logical Drive:Y  ===> PhyDrive:-1
[2022/12/05 15:46:08.014] Create file Handle:00000084 \\.\PhysicalDrive2 status:0
[2022/12/05 15:46:08.015] Read MBR Ret:1 Size:512 code:183
[2022/12/05 15:46:08.016] =========== Disk2 MBR Partition 1 ============
[2022/12/05 15:46:08.016] PartTbl.Active = 0x80
[2022/12/05 15:46:08.016] PartTbl.FsFlag = 0xc
[2022/12/05 15:46:08.016] PartTbl.StartSectorId = 2048
[2022/12/05 15:46:08.016] PartTbl.SectorCount = 63197059
[2022/12/05 15:46:08.017] PartTbl.StartHead = 32
[2022/12/05 15:46:08.017] PartTbl.StartSector = 33
[2022/12/05 15:46:08.017] PartTbl.StartCylinder = 0
[2022/12/05 15:46:08.017] PartTbl.EndHead = 254
[2022/12/05 15:46:08.018] PartTbl.EndSector = 63
[2022/12/05 15:46:08.018] PartTbl.EndCylinder = 1023
[2022/12/05 15:46:08.018] =========== Disk2 MBR Partition 2 ============
[2022/12/05 15:46:08.018] PartTbl.Active = 0x0
[2022/12/05 15:46:08.018] PartTbl.FsFlag = 0x0
[2022/12/05 15:46:08.019] PartTbl.StartSectorId = 0
[2022/12/05 15:46:08.019] PartTbl.SectorCount = 0
[2022/12/05 15:46:08.019] PartTbl.StartHead = 0
[2022/12/05 15:46:08.019] PartTbl.StartSector = 0
[2022/12/05 15:46:08.020] PartTbl.StartCylinder = 0
[2022/12/05 15:46:08.020] PartTbl.EndHead = 0
[2022/12/05 15:46:08.020] PartTbl.EndSector = 0
[2022/12/05 15:46:08.020] PartTbl.EndCylinder = 0
[2022/12/05 15:46:08.020] =========== Disk2 MBR Partition 3 ============
[2022/12/05 15:46:08.021] PartTbl.Active = 0x0
[2022/12/05 15:46:08.021] PartTbl.FsFlag = 0x0
[2022/12/05 15:46:08.021] PartTbl.StartSectorId = 0
[2022/12/05 15:46:08.021] PartTbl.SectorCount = 0
[2022/12/05 15:46:08.022] PartTbl.StartHead = 0
[2022/12/05 15:46:08.022] PartTbl.StartSector = 0
[2022/12/05 15:46:08.022] PartTbl.StartCylinder = 0
[2022/12/05 15:46:08.022] PartTbl.EndHead = 0
[2022/12/05 15:46:08.022] PartTbl.EndSector = 0
[2022/12/05 15:46:08.023] PartTbl.EndCylinder = 0
[2022/12/05 15:46:08.023] =========== Disk2 MBR Partition 4 ============
[2022/12/05 15:46:08.023] PartTbl.Active = 0x0
[2022/12/05 15:46:08.023] PartTbl.FsFlag = 0x0
[2022/12/05 15:46:08.024] PartTbl.StartSectorId = 0
[2022/12/05 15:46:08.024] PartTbl.SectorCount = 0
[2022/12/05 15:46:08.024] PartTbl.StartHead = 0
[2022/12/05 15:46:08.024] PartTbl.StartSector = 0
[2022/12/05 15:46:08.024] PartTbl.StartCylinder = 0
[2022/12/05 15:46:08.025] PartTbl.EndHead = 0
[2022/12/05 15:46:08.025] PartTbl.EndSector = 0
[2022/12/05 15:46:08.025] PartTbl.EndCylinder = 0
[2022/12/05 15:46:08.025] Part2 not match [0x0 0xef] [0 63199107] [0 65536]
[2022/12/05 15:46:08.026] < KINGSTON SA400S37240G> is filtered for not USB type.
[2022/12/05 15:46:08.026] < WDC WD10EZEX-08WN4A0> is filtered for not USB type.
[2022/12/05 15:46:08.046] Load languages from json file ...
[2022/12/05 15:46:08.053] language json file len:240544 json parse:0
[2022/12/05 15:46:08.056] Total 49 languages ...
[2022/12/05 15:46:08.176] Not ventoy disk, set secure boot option
[2022/12/05 15:46:14.344] SpaceMB:0 SizeInMB:30861
[2022/12/05 15:46:14.355] #####################################################
[2022/12/05 15:46:14.367] InstallVentoy2PhyDrive try1 MBR PhyDrive2 <<Mass Storage Device 32GB>>
[2022/12/05 15:46:14.375] #####################################################
[2022/12/05 15:46:14.379] Copy boot img success
[2022/12/05 15:46:14.382] Disk signature: 0x424a7176
[2022/12/05 15:46:14.383] ReservedSector: 0
[2022/12/05 15:46:14.384] Lock disk for clean .............................
[2022/12/05 15:46:14.385] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:14.387] [0] CreateFileA \\.\PhysicalDrive2 code:0 00000124
[2022/12/05 15:46:14.390] FSCTL_LOCK_VOLUME success
[2022/12/05 15:46:14.393] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:107376279552
[2022/12/05 15:46:14.394] LogicalDrive:\\.\D: PhyDrive:1 Offset:1048576 ExtentLength:492830720000
[2022/12/05 15:46:14.395] LogicalDrive:\\.\E: PhyDrive:0 Offset:107380473856 ExtentLength:132676321280
[2022/12/05 15:46:14.396] LogicalDrive:\\.\F: PhyDrive:1 Offset:492831768576 ExtentLength:507370274816
[2022/12/05 15:46:14.429] Could not open the disk<\\.\I:>, error:5
[2022/12/05 15:46:14.431] LogicalDrive:\\.\J: PhyDrive:2 Offset:1048576 ExtentLength:32356894208
[2022/12/05 15:46:14.432] J: is belong to phydrive2
[2022/12/05 15:46:14.436] Could not open the disk<\\.\V:>, error:5
[2022/12/05 15:46:14.438] Could not open the disk<\\.\W:>, error:5
[2022/12/05 15:46:14.440] Could not open the disk<\\.\Y:>, error:5
[2022/12/05 15:46:14.441] Delete mountpoint J:\ ret:1 code:0
[2022/12/05 15:46:14.454] Will use 'J:' as volume mountpoint
[2022/12/05 15:46:15.623] VDS init OK, service 003C047C
[2022/12/05 15:46:15.629] Callback 1 process for disk <\\?\PhysicalDrive2>
[2022/12/05 15:46:15.631] Deleting ALL partitions from disk '\\?\PhysicalDrive2':
[2022/12/05 15:46:15.633] * Partition 1 (offset: 1048576, size: 32356894208) delete it.
[2022/12/05 15:46:15.648] Delete this partitions success
[2022/12/05 15:46:15.648] VDS_DeleteAllPartitions 2 ret:1 (SUCCESS)
[2022/12/05 15:46:15.649] Deleting all partitions ......................... OK
[2022/12/05 15:46:15.649] Lock disk for write .............................
[2022/12/05 15:46:15.650] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:15.650] [0] CreateFileA \\.\PhysicalDrive2 code:0 000001EC
[2022/12/05 15:46:15.650] Opened \\.\PhysicalDrive2 for exclusive write access
[2022/12/05 15:46:15.651] FSCTL_LOCK_VOLUME success
[2022/12/05 15:46:15.654] Formatting part1 exFAT ...
[2022/12/05 15:46:15.655] Formatting Part1 exFAT ...
[2022/12/05 15:46:18.876] Formatting Part1 exFAT success
[2022/12/05 15:46:18.879] Writing part2 FAT img ...
[2022/12/05 15:46:18.881] FormatPart2Fat 63137792...
[2022/12/05 15:46:18.932] Malloc whole img buffer success, now decompress ...
[2022/12/05 15:46:19.526] decompress finished success
[2022/12/05 15:46:19.527] VentoyProcSecureBoot 1 ...
[2022/12/05 15:46:19.527] Secure boot is enabled ...
[2022/12/05 15:46:20.289] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:21.342] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:22.075] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:22.268] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:22.462] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:22.647] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:24.283] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:24.470] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:24.657] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:24.850] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:25.045] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:25.238] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:25.433] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:25.627] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:25.821] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.012] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.197] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.384] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.568] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.754] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:26.939] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:27.122] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:27.304] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:27.490] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:27.805] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:27.995] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:28.182] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:29.277] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.012] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.201] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.397] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.581] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.743] Read part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:30.745] ### [Check Fail] The data write and read does not match
[2022/12/05 15:46:30.750] FormatPart2Fat failed.
[2022/12/05 15:46:30.751] FindProcessOccupyDisk for PhyDrive 2
[2022/12/05 15:46:30.751] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:30.762] handles->NumberOfHandles = 34732
[2022/12/05 15:46:30.762] NOTE: Could not identify the process(es) or service(s) accessing \Device\Harddisk2\DR7
[2022/12/05 15:46:30.763] This time install failed, clean disk by disk, wait 5s and retry...
[2022/12/05 15:46:30.800] VDS init OK, service 003C0DC4
[2022/12/05 15:46:30.830] Callback 1 process for disk <\\?\PhysicalDrive2>
[2022/12/05 15:46:34.331] Disk clean QueryStatus OK
[2022/12/05 15:46:34.331] VDS_CleanDisk 2 ret:1 (SUCCESS)
[2022/12/05 15:46:39.333] Now retry to install...
[2022/12/05 15:46:39.334] #####################################################
[2022/12/05 15:46:39.336] InstallVentoy2PhyDrive try2 MBR PhyDrive2 <<Mass Storage Device 32GB>>
[2022/12/05 15:46:39.338] #####################################################
[2022/12/05 15:46:39.338] Disk signature: 0x95587767
[2022/12/05 15:46:39.339] ReservedSector: 0
[2022/12/05 15:46:39.339] Lock disk for clean .............................
[2022/12/05 15:46:39.339] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:39.339] [0] CreateFileA \\.\PhysicalDrive2 code:0 000001EC
[2022/12/05 15:46:39.340] FSCTL_LOCK_VOLUME success
[2022/12/05 15:46:39.341] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:107376279552
[2022/12/05 15:46:39.341] LogicalDrive:\\.\D: PhyDrive:1 Offset:1048576 ExtentLength:492830720000
[2022/12/05 15:46:39.341] LogicalDrive:\\.\E: PhyDrive:0 Offset:107380473856 ExtentLength:132676321280
[2022/12/05 15:46:39.341] LogicalDrive:\\.\F: PhyDrive:1 Offset:492831768576 ExtentLength:507370274816
[2022/12/05 15:46:39.372] Could not open the disk<\\.\I:>, error:5
[2022/12/05 15:46:39.375] Could not open the disk<\\.\V:>, error:5
[2022/12/05 15:46:39.377] Could not open the disk<\\.\W:>, error:5
[2022/12/05 15:46:39.379] Could not open the disk<\\.\Y:>, error:5
[2022/12/05 15:46:39.379] No drive letter was assigned...
[2022/12/05 15:46:39.379] GetFirstUnusedDriveLetter G: ...
[2022/12/05 15:46:39.379] Will use 'G:' as volume mountpoint
[2022/12/05 15:46:39.416] VDS init OK, service 003D1B5C
[2022/12/05 15:46:39.418] Callback 1 process for disk <\\?\PhysicalDrive2>
[2022/12/05 15:46:39.418] Deleting ALL partitions from disk '\\?\PhysicalDrive2':
[2022/12/05 15:46:39.419] No partition to delete on disk '\\?\PhysicalDrive2'
[2022/12/05 15:46:39.419] VDS_DeleteAllPartitions 2 ret:1 (SUCCESS)
[2022/12/05 15:46:39.419] Deleting all partitions ......................... OK
[2022/12/05 15:46:39.420] Lock disk for write .............................
[2022/12/05 15:46:39.420] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:39.420] [0] CreateFileA \\.\PhysicalDrive2 code:0 000001EC
[2022/12/05 15:46:39.420] Opened \\.\PhysicalDrive2 for exclusive write access
[2022/12/05 15:46:39.421] FSCTL_LOCK_VOLUME success
[2022/12/05 15:46:39.424] Formatting part1 exFAT ...
[2022/12/05 15:46:39.424] Formatting Part1 exFAT ...
[2022/12/05 15:46:42.697] Formatting Part1 exFAT success
[2022/12/05 15:46:42.698] Writing part2 FAT img ...
[2022/12/05 15:46:42.699] FormatPart2Fat 63137792...
[2022/12/05 15:46:42.704] Malloc whole img buffer success, now decompress ...
[2022/12/05 15:46:43.281] decompress finished success
[2022/12/05 15:46:43.281] VentoyProcSecureBoot 1 ...
[2022/12/05 15:46:43.281] Secure boot is enabled ...
[2022/12/05 15:46:43.551] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:43.736] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:43.920] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:44.105] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:44.290] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:44.476] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:44.660] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:44.845] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.037] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.221] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.405] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.591] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.774] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:45.957] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:46.140] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:46.323] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:46.639] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:46.823] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.011] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.199] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.387] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.573] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.756] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:47.941] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:50.423] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:51.152] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:51.338] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:51.522] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:51.706] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:51.890] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:52.073] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:52.257] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:52.420] Read part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:46:52.422] ### [Check Fail] The data write and read does not match
[2022/12/05 15:46:52.427] FormatPart2Fat failed.
[2022/12/05 15:46:52.428] FindProcessOccupyDisk for PhyDrive 2
[2022/12/05 15:46:52.428] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:46:52.433] handles->NumberOfHandles = 34698
[2022/12/05 15:46:52.433] NOTE: Could not identify the process(es) or service(s) accessing \Device\Harddisk2\DR7
[2022/12/05 15:46:52.435] This time install failed, clean disk by diskpart, wait 10s and retry...
[2022/12/05 15:46:52.435] CleanDiskByDiskpart <2>
[2022/12/05 15:46:52.436] CreateProcess <C:\Windows\system32\diskpart.exe /s "C:\Users\bd1003\Desktop\ventoy-1.0.81\ventoy\diskpart_8320.txt">
[2022/12/05 15:46:52.457] Wair process ...
[2022/12/05 15:46:56.732] Process finished...
[2022/12/05 15:47:06.736] Now retry to install...
[2022/12/05 15:47:06.736] #####################################################
[2022/12/05 15:47:06.738] InstallVentoy2PhyDrive try3 MBR PhyDrive2 <<Mass Storage Device 32GB>>
[2022/12/05 15:47:06.740] #####################################################
[2022/12/05 15:47:06.742] Disk signature: 0x0e89320d
[2022/12/05 15:47:06.742] ReservedSector: 0
[2022/12/05 15:47:06.742] Lock disk for clean .............................
[2022/12/05 15:47:06.742] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:47:06.743] [0] CreateFileA \\.\PhysicalDrive2 code:0 000001EC
[2022/12/05 15:47:06.744] FSCTL_LOCK_VOLUME success
[2022/12/05 15:47:06.744] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:107376279552
[2022/12/05 15:47:06.744] LogicalDrive:\\.\D: PhyDrive:1 Offset:1048576 ExtentLength:492830720000
[2022/12/05 15:47:06.745] LogicalDrive:\\.\E: PhyDrive:0 Offset:107380473856 ExtentLength:132676321280
[2022/12/05 15:47:06.745] LogicalDrive:\\.\F: PhyDrive:1 Offset:492831768576 ExtentLength:507370274816
[2022/12/05 15:47:06.776] Could not open the disk<\\.\I:>, error:5
[2022/12/05 15:47:06.778] Could not open the disk<\\.\V:>, error:5
[2022/12/05 15:47:06.780] Could not open the disk<\\.\W:>, error:5
[2022/12/05 15:47:06.782] Could not open the disk<\\.\Y:>, error:5
[2022/12/05 15:47:06.782] No drive letter was assigned...
[2022/12/05 15:47:06.783] GetFirstUnusedDriveLetter G: ...
[2022/12/05 15:47:06.783] Will use 'G:' as volume mountpoint
[2022/12/05 15:47:06.820] VDS init OK, service 003D24A4
[2022/12/05 15:47:07.087] Callback 1 process for disk <\\?\PhysicalDrive2>
[2022/12/05 15:47:07.087] Deleting ALL partitions from disk '\\?\PhysicalDrive2':
[2022/12/05 15:47:07.087] No partition to delete on disk '\\?\PhysicalDrive2'
[2022/12/05 15:47:07.088] VDS_DeleteAllPartitions 2 ret:1 (SUCCESS)
[2022/12/05 15:47:07.088] Deleting all partitions ......................... OK
[2022/12/05 15:47:07.088] Lock disk for write .............................
[2022/12/05 15:47:07.088] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:47:07.089] [0] CreateFileA \\.\PhysicalDrive2 code:0 000001EC
[2022/12/05 15:47:07.089] Opened \\.\PhysicalDrive2 for exclusive write access
[2022/12/05 15:47:07.089] FSCTL_LOCK_VOLUME success
[2022/12/05 15:47:07.092] Formatting part1 exFAT ...
[2022/12/05 15:47:07.093] Formatting Part1 exFAT ...
[2022/12/05 15:47:10.267] Formatting Part1 exFAT success
[2022/12/05 15:47:10.268] Writing part2 FAT img ...
[2022/12/05 15:47:10.268] FormatPart2Fat 63137792...
[2022/12/05 15:47:10.273] Malloc whole img buffer success, now decompress ...
[2022/12/05 15:47:10.851] decompress finished success
[2022/12/05 15:47:10.851] VentoyProcSecureBoot 1 ...
[2022/12/05 15:47:10.851] Secure boot is enabled ...
[2022/12/05 15:47:11.121] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:11.305] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:11.491] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:11.676] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:11.860] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:12.054] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:12.238] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:12.425] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:12.742] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:12.927] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:13.110] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:13.295] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:13.479] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:13.663] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:13.846] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:14.029] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:15.115] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:15.841] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.028] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.212] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.397] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.581] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.766] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:16.962] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:18.002] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:18.729] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:18.912] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.098] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.281] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.466] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.649] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.833] Write part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.996] Read part data bRet:1 dwSize:1048576 code:183
[2022/12/05 15:47:19.998] ### [Check Fail] The data write and read does not match
[2022/12/05 15:47:20.003] FormatPart2Fat failed.
[2022/12/05 15:47:20.005] FindProcessOccupyDisk for PhyDrive 2
[2022/12/05 15:47:20.006] QueryDosDeviceA success \Device\Harddisk2\DR7
[2022/12/05 15:47:20.010] handles->NumberOfHandles = 34613
[2022/12/05 15:47:20.010] NOTE: Could not identify the process(es) or service(s) accessing \Device\Harddisk2\DR7
[2022/12/05 15:47:25.574] Not ventoy disk, set secure boot option

longpanda

db708 发表于 2022-12-5 15:51
##################################################################################
################ ...

从你的U盘名字，以及log里显示的
### [Check Fail] The data write and read does not match

基本上可以判定你这个U盘是有问题的，山寨盘或者扩容盘之类的。我收到过很多很多这种类似的问题。
参考文档===》 https://www.ventoy.net/cn/doc_fake_usb.html

aaa1942

大神就是神速啊，辛苦了大神

hsc

請問longpanda 大神，1.0.84  有菜单多语言支持, 下一版會加入繁体的嗎?

无垠

1.0.84不错！

2010techon

支持原创，感谢分享
主启动程序又多了一个选择

tpod

1.0.84 版安装时选择NTFS但是还是格式化成exFAT
http://bbs.c3.wuyou.net/forum.php?mod=viewthread&tid=433215
选择exFAT时，指定簇大小不起作用，设置默认或128K，安装后都是32K

Syl1us

tpod 发表于 2022-12-6 13:08
1.0.84 版安装时选择NTFS但是还是格式化成exFAT
http://bbs.c3.wuyou.net/forum.php?mod=viewthread&tid=4 ...

我都是升级或无损安装