无忧启动论坛

 找回密码
 注册
搜索
系统gho:最纯净好用系统下载站广告联系 微信:wuyouceo QQ:184822951
查看: 2568|回复: 4

[求助] 求英语达人翻译教程

[复制链接]
发表于 2018-10-31 11:03:48 | 显示全部楼层 |阅读模式
XDA下载ROM,只能看懂7、8成怕刷成砖。求助坛友翻译,万分感谢。如有违规请版主删除...

Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted

To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar

To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted

To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot

To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
发表于 2018-10-31 14:19:18 | 显示全部楼层
这么基础的东西 Google翻译一下就OK了
回复

使用道具 举报

发表于 2018-10-31 18:39:41 | 显示全部楼层
指令
1。下载S7SyeRoToUnRoToToAdBoToo.7z和您想要的模型和版本
2。将S7S7EYROUTIONUROTHOADBToo.7ZZ解压到S7OS7EYROOTU-UNROTHOADBBoTooX文件夹
三。解压缩您下载的模型/版本文件,并将文件复制到S7_S7E_ROOT_UNROOT_ADB_TOOLS文件夹,并将其放置在Odin文件夹中
4。准备手机擦拭数据
5。重新启动手机下载模式并在AdIn AP时隙中闪存ApRooTojg93*.TAR并重新启动手机恢复
6。一旦电话处于恢复状态,就在S7OS.RoToSUnRoTo.AdBoTooX文件夹中运行StupU.EXE
7。现在在CMD窗口确保您的设备连接并选择选项(1)启动TWRP
8。您的电话应该启动TWRP左电话插入和命令窗口在计算机上打开
9。现在在TWRP中选择擦除并选择格式数据。当询问时在框中键入“是”
10。现在在CMD窗口选择选项(8)Push Root.zip到电话
11。现在在TWRP中选择安装并选择Root.zip
12。zip安装后重新启动并通过安装程序。
13。一旦通过安装,确保你是扎根的
解开你的手机
1。在根控制应用程序中选择电话设置和根电话确保手机与计算机连接
2。现在,根据您选择的root类型,如果您选择了系统根,那么您的手机将重新启动以下载;如果您选择了无系统根,则将重新启动以恢复库存。如果你的手机重新启动下载模式跳过第5号
三。如果您的手机处于恢复状态,您的手机重新启动到恢复,则在S7OS.RoToSUnRoTo.AdBoTooX文件夹中运行SETUP.EXE
4。在CMD窗口选择选项(3)未根电话将重新启动过下载模式
5。在Odin BL插槽中,选择BL_G93*_DELETE_CACHE.tar,闪存电话将重新启动以恢复,并说处理更新然后得到一个错误并立即重新启动恢复。
6。让恢复BooTrac至少一次瘦力手机回到下载模式
7。在ODIN AP时隙Flash BLyEngEngEnEngReValyYyG93*.TAR和Flash电话将重新引导恢复到一堆红色缓存错误
8。在恢复中选择擦除缓存,然后重新启动到引导加载程序恢复
9。在Odin BL槽中选择BeloOrooStulgG93*.用于ORIO或BLL RESETETMD VRIVITY G93TAR。
10。这是重要的,一旦奥丁完成闪烁和电话电源立即扣住按钮,迫使电话恢复。
11。当手机重新启动恢复时,您将不会得到任何命令错误,然后当手机显示恢复选项在黑匣子非常底部,它应该说,成功验证。如果它说不成功或失败,那么从5开始。如果成功,奥利奥,你就完成了。
12。如果在NUGAT上成功,从恢复启动到Bootloader中的Odin BL插槽Flash BLY-NUGATATSCORDYGG93*TAR
打手机
1。重新启动下载ODIN AP时隙flash ApRooToL*G93**.TAR
2。手机将重新启动,然后重新启动一次,你将被推入。
生根进入TWRP
记住NUGAT TWRP不能因为加密而安装数据,所以一些拉链不能正常工作。
1。手动重启手机以恢复S7O7RooToRunToUnRoToAdBoTooX文件夹中的启动启动StupU.EXE,并选择选项(1)启动TWRP
2。Exit TWRP简单地选择重启
当无根时进入TWRP
记住NUGAT TWRP不能因为加密而安装数据,所以一些拉链不能正常工作。
1。把手机下载到ODIN AP时隙flash ApRoToTug G9**.TAR力手机重新启动到恢复。如果你让手机启动,它将重新运行,你必须从根控制应用程序运行unroot。
2。在恢复启动StUpU.EXE中,在S7SyRoToRoTun-UnROOTH-ADBJoToE文件夹中选择选项(1)启动TWRP。
三。做任何你需要做的事
4。退出TWRP选择重启下载
5。在Odin BL插槽中,选择BL_G93*_DELETE_CACHE.tar,闪存电话将重新启动以恢复,并说处理更新然后得到一个错误并立即重新启动恢复。
6。让恢复BooTrac至少一次瘦力手机回到下载模式
7。在ODIN AP时隙Flash BLyEngEngEnEngReValyYyG93*.TAR和Flash电话将重新引导恢复到一堆红色缓存错误
8。在恢复中选择擦除缓存,然后重新启动到引导加载程序恢复
9。在Odin BL槽中选择BeloOrooStulgG93*.用于ORIO或BLL RESETETMD VRIVITY G93TAR。
10。这是重要的,一旦奥丁完成闪烁和电话电源立即扣住按钮,迫使电话恢复。
11。当手机重新启动恢复时,您将不会得到任何命令错误,然后当手机显示恢复选项在黑匣子非常底部,它应该说,成功验证。如果它说不成功或失败,那么从5开始。如果成功,奥利奥,你就完成了。
12。如果在NUGAT上成功,从恢复启动到Bootloader中的Odin BL插槽Flash BLY-NUGATATSCORDYGG93*TAR

点评

谢谢帮忙,不过你这是复制粘贴啊  详情 回复 发表于 2018-11-1 09:09
回复

使用道具 举报

发表于 2018-10-31 22:35:31 | 显示全部楼层
三星手机刷机教程
回复

使用道具 举报

 楼主| 发表于 2018-11-1 09:09:48 | 显示全部楼层
862228699 发表于 2018-10-31 18:39
指令
1。下载S7SyeRoToUnRoToToAdBoToo.7z和您想要的模型和版本
2。将S7S7EYROUTIONUROTHOADBToo.7ZZ解压 ...

谢谢帮忙,不过你这是复制粘贴啊
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1 )

闽公网安备 35020302032614号

GMT+8, 2024-4-19 03:09

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表