谁来推荐一款最好用的镜像文件转换成ISO的工具

jensen

谁来推荐一款最好用的镜像文件转换成ISO的工具
有没有这样的,,
1、支持的格式多
2、命令行下可以用的,
3、不用安装的,
4、未想到。。。。。

--------------------------------------------------------------------------------
附BIN TO ISO 的 C++ 原代码
///////////////////////////////////////////////////////////////////////////////

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
//
// BIN2ISO (C) 2000 by DeXT
//
// This is a very simple utility to convert a BIN image (either RAW/2352 or Mode2/2336 format)
// to standard ISO format (2048 b/s). Structure of images are as follows:
//
// Mode 1 (2352): Sync (12), Address (3), Mode (1), Data (2048), ECC (288)
// Mode 2 (2352): Sync (12), Address (3), Mode (1), Subheader (8), Data (2048), ECC (280)
// Mode 2 (2336): Subheader (8), Data (2048), ECC (280)
//
// Mode2/2336 is the same as Mode2/2352 but without header (sync+addr+mode)
// Sector size is detected by the presence of Sync data
// Mode is detected from Mode field
//
// Tip for Mac users: for Mode2 tracks preserve Subheader
// (sub 8 from seek_header and write 2056 bytes per sector)
//
//
// Changelog:
//
// 2000/11/16 - added mode detection for RAW data images (adds Mode2/2352 support)
//
//
void main( int argc, char **argv )
{
int   seek_header, seek_ecc, sector_size;
long  i, source_length;
char  buf[2352], destfilename[_MAX_PATH];
const char SYNC_HEADER[12] = { 0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0 };
FILE  *fdest, *fsource;
if (argc < 2)
   {
   printf("Error: bad syntax\n\nUsage is: bin2iso image.bin [image.iso]\n");
   exit(EXIT_FAILURE);
   }
if (argc >= 3)
   {
strcpy(destfilename, argv[2]);
   }
else
   {
   strcpy(destfilename, argv[1]);
   if (strlen(argv[1]) < 5 || stricmp(destfilename+strlen(argv[1])-4, ".bin"))
   strcpy(destfilename+strlen(argv[1]), ".iso");
   else
   strcpy(destfilename+strlen(argv[1])-4, ".iso");
   }
fsource = fopen(argv[1],"rb");
fdest = fopen(destfilename,"wb");
fread(buf, sizeof(char), 16, fsource);
if (memcmp(SYNC_HEADER, buf, 12))
   {
seek_header = 8;// Mode2/2336    // ** Mac: change to 0
seek_ecc = 280;
sector_size = 2336;
   }
else
   {
switch(buf[15])
   {
   case 2:
seek_header = 24;// Mode2/2352    // ** Mac: change to 16
seek_ecc = 280;
sector_size = 2352;
break;
   case 1:
seek_header = 16;// Mode1/2352
seek_ecc = 288;
sector_size = 2352;
break;
   default:
printf("Error: Unsupported track mode");
exit(EXIT_FAILURE);
   }
   }
fseek(fsource, 0L, SEEK_END);
source_length = ftell(fsource)/sector_size;
fseek(fsource, 0L, SEEK_SET);
for(i = 0; i < source_length; i++)
   {
fseek(fsource, seek_header, SEEK_CUR);
fread(buf, sizeof(char), 2048, fsource);    // ** Mac: change to 2056 for Mode2
fwrite(buf, sizeof(char), 2048, fdest);     // ** same as above
fseek(fsource, seek_ecc, SEEK_CUR);
   }
fclose(fdest);
fclose(fsource);
exit(EXIT_SUCCESS);
}
/////////////////////////////////////////////////////////////////////////////

wwwliu

winiso

s210603

IsoBuster